Aidan's loose oily bunghole actually runs a track lap
#9922
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
So what keeps the oil from draining back from the cooler. And if it drains back what should the level be when not running.
Any reason not to just check oil when running?
Any reason not to just check oil when running?
#9923
Retired Mech Design Engr
iTrader: (3)
Join Date: Jan 2013
Location: Seneca, SC
Posts: 5,009
Total Cats: 857
Lots of the oil is in the head and vertical passages.
You might contact @hornetball regarding what he does. It's in a themread somewhere, but I don't remember where. He has cooler lines pointing down.
You might contact @hornetball regarding what he does. It's in a themread somewhere, but I don't remember where. He has cooler lines pointing down.
#9925
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Drained the pan. Plug had zero metal on it. Put in 4 quarts. Need to do some front end ducting to try and bring oil temps down. Have some cardboard templates made. Will cut out of aluminum this week. Track day on Thursday. First time instructing so I'll probably end up focused more on that than my car.
#9927
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Some more data points from logs at the track.
Max Transmission temp of 204. I'm most likely under 200hp.
Max EGT of 1450. Very retarded spark map, but low boost. I'd definitely want inconel valves before turning it up on track.
Maxing out my 1kpsi brake pressure sensor. Still gives cool video overlays.
Max Transmission temp of 204. I'm most likely under 200hp.
Max EGT of 1450. Very retarded spark map, but low boost. I'd definitely want inconel valves before turning it up on track.
Maxing out my 1kpsi brake pressure sensor. Still gives cool video overlays.
#9928
Retired Mech Design Engr
iTrader: (3)
Join Date: Jan 2013
Location: Seneca, SC
Posts: 5,009
Total Cats: 857
Some more data points from logs at the track.
Max Transmission temp of 204. I'm most likely under 200hp.
Max EGT of 1450. Very retarded spark map, but low boost. I'd definitely want inconel valves before turning it up on track.
Maxing out my 1kpsi brake pressure sensor. Still gives cool video overlays.
Max Transmission temp of 204. I'm most likely under 200hp.
Max EGT of 1450. Very retarded spark map, but low boost. I'd definitely want inconel valves before turning it up on track.
Maxing out my 1kpsi brake pressure sensor. Still gives cool video overlays.
#9931
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
I ran into what I believe was det earlier in the tuning process. I also had leaky stem seals, and a lot of oil in the intake stream. And didn't have det cans in at the time.
25psi pulls without det cans were not the best idea, but the boost bug bit.
The way I see it I'm only running low boost on the track for now, so stock exhaust valves will stand a chance.
Inconel exhaust valves appear to be very necessary at any higher boost on track though.
Highest EGT on the street i've seen was like 1250. Even at 15+psi.
Track I'm seeing 1450 at 5-7psi.
25psi pulls without det cans were not the best idea, but the boost bug bit.
The way I see it I'm only running low boost on the track for now, so stock exhaust valves will stand a chance.
Inconel exhaust valves appear to be very necessary at any higher boost on track though.
Highest EGT on the street i've seen was like 1250. Even at 15+psi.
Track I'm seeing 1450 at 5-7psi.
#9934
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
I wish. We have one station in town. And its 45 minutes from me. And at my 2 home tracks there isn't any. I also don't need any more power on the track. I have plenty of rope to hang myself with, and a lot left in the car. I'd like to get some stiffer springs and some aero. And drop a few more seconds at PIR.