Aidan's loose oily bunghole actually runs a track lap
#1944
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
<p>Yes. Because the first page of my build thread has so many damn pictures that it takes a year to load on my phone. And thats the page that chrome auto completes to. If I could have a seperate mobile and desktop post count I could. Newb post per page I'm at 98 pages </p>
#1945
Elite Member
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,441
Total Cats: 1,899
On the cooper rotors YOU WILL NEED TO MAKE RINGS to get them to center correctly. The holes for the lugs are a bit big and thus a bit loose, and the cooper hub center is much larger than the Miata hub center. It will not center correctly without one. Your car will come apart and you will die.
This is from someone who is running 11" cooper rotors atm.
This is from someone who is running 11" cooper rotors atm.
#1947
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
<p>We are ghetto rigging a BBK. Hence the need for rings. As far as I can tell we can just turn some rotors on a lathe to get the rings. Just cut out the middle bit. Or make our own.</p>
#1949
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
<p>Probably lol. I'm gonna leave that up to Sean. He has a lot more machining experience than me. The turning rotors was just an idea.</p><p>The only real issue we had seen so far was that the rotors might be too thick. Also, not sure on wheel clearance yet. I know dynapros clear more because they are lower profile. They are more expensive but apparently you get a lot more pad material.</p>
#1950
SadFab CEO
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
<p>yes, hubcentric rings are absolutely required for the rotors. as EO2K explained above the bolts holes are not held to a tolerance and cant be relied upon to center the rotor, nor would i want to locate something that precise with a threaded locator.</p><p>mahcining the rings is cake, no problem there. piece of round stock- done.</p><p>the reason hub centerics arnt needed for wheels is becuase our cars use wheels with 60 degree conical seats, which serves that function. its funny how many arguments ive been in on s10forum about how you dont need hub centric rings as they use 60 conical lugs as well, and they center the wheel as they are torqued. the standard response is "thats not what the internet says".</p>
#1951
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
<p>^what he said.</p><p>Honestly I'm just along for the ride. Sean has experience making s10 brake conversion parts. I have a mill that I will probably use to try and build my own. Then just give up when I destroy a **** ton of material, and beg sean to make me another set. </p>
#1954
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
<p>About to pull the trigger on these:</p><p>Hawk for 1994 2001 Mazda Miata HB149G 505 Brake | eBay</p><p>Anyone know where to get them cheaper?</p>
#1955
Elite Member
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,441
Total Cats: 1,899
Oh yeah, I'm just being silly, I'm interested to see how this turns out.
After ruining a set of expensive pads on the stock brakes, I went with the 11" + Dynalite in order to get away from the stock caliper. My ultimate goal was to do the TSE 11.75" Upgrade but I'm finding the $375 to be tough to swallow as I'm not out driving the 11" setup. That might change when I'm running 3x the power on my fatass full interior NB, but I'll cross that bridge when I get there.
After ruining a set of expensive pads on the stock brakes, I went with the 11" + Dynalite in order to get away from the stock caliper. My ultimate goal was to do the TSE 11.75" Upgrade but I'm finding the $375 to be tough to swallow as I'm not out driving the 11" setup. That might change when I'm running 3x the power on my fatass full interior NB, but I'll cross that bridge when I get there.
#1956
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
<p>Brakes are figured out for now. 1.8 brackets are in the mail from G, as are DTC-60's from yank. Going to run these cobalts to the ground and keep the DTC-60's and brackets in a box in my truck. I can swap brackets and rotors between sessions no problem. Going to bring my calipers and get an idea of how much wear I get per session.</p><p>My rear pads wear about twice as slow, and the cobalts started out with more material, so I think I should be good on those through thunderhill. Although depending on this weekend I may get some rear brackets and DTC-30s???? for the rear.</p><p>Rockauto or napa for rotors? Or vatozone?</p>
#1959
SadFab CEO
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
1990 Cheap, beat, and full of mistakes build
<br /><p><span>@hi_im_sean we should design rear brackets to mate 1.8 brakes to sport rotors.</span></p><br />