Another FP Auto-x build
Hello. Low post count so I decided this was a good way to up it so people don't think I am scamming them when I try to buy things.
Intro: I co-drove Shawn (fourwhl's) FP car for a couple years before I decided buying a Fiat was a good idea. After campaigning if for a couple years I jettisoned that car to Carvana after this season and decided to ruin a perfectly good running 2001 in an effort to get back into prepared life. Out with the old in with the new. https://cimg1.ibsrv.net/gimg/www.mia...18e6eaf4c.jpeg It wasn't running when purchased. After some troubleshooting the immobilizer was missing. Fired it up, got it back on the trailer, towed to the DMV, and titled in my name. https://cimg5.ibsrv.net/gimg/www.mia...5a1aa6509.jpeg All the old crap came out: https://cimg3.ibsrv.net/gimg/www.mia...b822429d5.jpeg https://cimg4.ibsrv.net/gimg/www.mia...bbb28a6d9.jpeg |
some of the old stuff was a bit more stubborn than others. dry ice on the sound deadening, rotary wheel on the seam sealer, and some cutting wheels to the door skins.
https://cimg1.ibsrv.net/gimg/www.mia...597dc315a.jpeg https://cimg5.ibsrv.net/gimg/www.mia...7eb1c3d64.jpeg All getting ready for paint: https://cimg0.ibsrv.net/gimg/www.mia...b228a6d9e.jpeg https://cimg1.ibsrv.net/gimg/www.mia...857e1cb6e.jpeg |
I built a center console
https://cimg7.ibsrv.net/gimg/www.mia...9ca97f0e9.jpeg Installed an electronic rack https://cimg3.ibsrv.net/gimg/www.mia...8cb3341b3.jpeg added a fit pedal https://cimg6.ibsrv.net/gimg/www.mia...e3cd96100.jpeg made some more room at the front https://cimg6.ibsrv.net/gimg/www.mia...84449b4fb.jpeg and cut some holes in a hood https://cimg7.ibsrv.net/gimg/www.mia...efe3587f7.jpeg |
ran some 6an lines
https://cimg8.ibsrv.net/gimg/www.mia...aab632e16.jpeg and started to put the corners together https://cimg6.ibsrv.net/gimg/www.mia...d59ec0f33.jpeg ....and that is pretty much where it is at today. https://cimg3.ibsrv.net/gimg/www.mia...be4b379e6.jpeg |
have some interesting bits on deck
https://cimg2.ibsrv.net/gimg/www.mia...5f68d83a2.jpeg https://cimg3.ibsrv.net/gimg/www.mia...6869e880c.jpeg https://cimg5.ibsrv.net/gimg/www.mia...a220c1746.jpeg https://cimg0.ibsrv.net/gimg/www.mia...cebc3d21c.jpeg https://cimg1.ibsrv.net/gimg/www.mia...c99453b16.jpeg |
Progress has stalled a bit as i am waiting on parts. Knocked out some small stuff the past couple days.
All 4 corners are together and of course on the last coilover i find that it is a bit too close to comfort with the extended ball joints and wherever the eccentric bolts landed. Didn't like it, so I pulled both fronts and took a bit of material out problem solved. https://cimg8.ibsrv.net/gimg/www.mia...a945202b2.jpeg https://cimg7.ibsrv.net/gimg/www.mia...40ed8ec44.jpeg https://cimg6.ibsrv.net/gimg/www.mia...89f17923b.jpeg Swapped the reinforced differential housing on. Awaiting some bushings so I can button up the rear. https://cimg1.ibsrv.net/gimg/www.mia...2703e7ddb.jpeg I wanted to get the inner and outer tie rods in today, but the ones that came off the car were less than ideal and I am missing the lock washers for the inner tie rods. Ordered. Waiting game at this point. https://cimg8.ibsrv.net/gimg/www.mia...afa802b9e.jpeg |
Rear canisters mounted. Used some 50mm fuel filter pump mounts and feel it turned out well. I need to figure out a solution for the newly made holes. Seems a desk cable management type grommet would work.
https://cimg2.ibsrv.net/gimg/www.mia...4e5abb233.jpeg |
Retuned to the house after a short vacation to some strategically timed packages. Progress isn’t anything too exciting, but it is progress. Tie rods completed the steering, front canisters are mounted, and all lines are routed via p-clamps.
https://cimg7.ibsrv.net/gimg/www.mia...2dd2aff9a.jpeg https://cimg8.ibsrv.net/gimg/www.mia...f9bd7c3b8.jpeg https://cimg0.ibsrv.net/gimg/www.mia...3805987f1.jpeg https://cimg3.ibsrv.net/gimg/www.mia...2f39497fc.jpeg |
Between it being cold and awaiting stuff from KPI progress has slowed a bit. Trying to knock out more small stuff. Intercooler found it’s home.
https://cimg5.ibsrv.net/gimg/www.mia...98371bb48.jpeg https://cimg7.ibsrv.net/gimg/www.mia...015c525dc.jpeg |
FPR and return line buttoned up
https://cimg2.ibsrv.net/gimg/www.mia...424723b25.jpeg https://cimg4.ibsrv.net/gimg/www.mia...a80a687f9.jpeg |
Desk grommets for the canister holes. Some seam sealer has these not going anywhere.
https://cimg7.ibsrv.net/gimg/www.mia...a27ee4cd1.jpeg hardline deleted https://cimg3.ibsrv.net/gimg/www.mia...09d7d4443.jpeg https://cimg9.ibsrv.net/gimg/www.mia...927dc5490.jpeg splitter assembled, going to need to figure out some mounts that don’t interfere with the future ic piping https://cimg9.ibsrv.net/gimg/www.mia...7381872d2.jpeg followed fourwhl’s guide to tapping a valve cover for an fittings https://cimg1.ibsrv.net/gimg/www.mia...fcf0429cf.jpeg shiny intake sitting on the motor https://cimg3.ibsrv.net/gimg/www.mia...b521a3f74.jpeg |
Yesterday was a refresh myself on every way to extract a bolt day. Note to self: turn kerosene heater off when using the new torque wrench as you can’t hear the click and inch pounds are a lot less than foot pounds.
https://cimg1.ibsrv.net/gimg/www.mia...831430b99.jpeg https://cimg4.ibsrv.net/gimg/www.mia...a8e689b1e.jpeg after cleaning that mess up I decided to take on the quick task of removing the exhaust studs to insert some fresh replacements. It went equally as well. https://cimg6.ibsrv.net/gimg/www.mia...f059a9dbf.jpeg NA alternator on Valve cover on (sans one bolt) Replaced the -8 with a -10 so both fittings match https://cimg0.ibsrv.net/gimg/www.mia...94fd53e6b.jpeg look at that, my order from October 4th finally decided to show up. Might actually be able to get the differential back in the car. https://cimg4.ibsrv.net/gimg/www.mia...1f5719ce8.jpeg |
Threads chased, anti seize applied, and new studs inserted. Future me better be happy, what a pain.
https://cimg2.ibsrv.net/gimg/www.mia...f62c3dcbb.jpeg https://cimg3.ibsrv.net/gimg/www.mia...17011a9bd.jpeg Throttle body on https://cimg0.ibsrv.net/gimg/www.mia...96524a747.jpeg Differential finally prepped for install. https://cimg3.ibsrv.net/gimg/www.mia...e38603b52.jpeg |
Don’t randomly throw stuff away. Tossed the expansion tank on accident so I had to pick up a new one.
https://cimg0.ibsrv.net/gimg/www.mia...ad942b155.jpeg Intake side of the motor is buttoned up now that the gaskets arrived. New fuel rail and injectors in. I took the opportunity the broken valve cover bolt presented to upgrade all the hardware to stainless. https://cimg3.ibsrv.net/gimg/www.mia...1d5537fef.jpeg https://cimg4.ibsrv.net/gimg/www.mia...ca837f357.jpeg https://cimg6.ibsrv.net/gimg/www.mia...13377d191.jpeg one half of the turbo arrived. I found a deal on a lightly used unit with the wrong ar for my application. Exhaust portion ordered and on its way from full race. https://cimg7.ibsrv.net/gimg/www.mia...aa0a47570.jpeg |
This hydraulic lift table might be the most valuable tool in my garage. Made the differential install painless. Now that it is in I can get the rear buttoned up. I’ll have a roller soon enough.
https://cimg5.ibsrv.net/gimg/www.mia...dac2a009b.jpeg https://cimg3.ibsrv.net/gimg/www.mia...5b13d9bd7.jpeg |
Blackbird fabworx tow hook installed. Pretty low on the priority list but it mounts where the intercooler is so why not.
https://cimg5.ibsrv.net/gimg/www.mia...c3b01eb1d.jpeg Axles installed https://cimg9.ibsrv.net/gimg/www.mia...129b303d9.jpeg https://cimg0.ibsrv.net/gimg/www.mia...e9621da6d.jpeg https://cimg1.ibsrv.net/gimg/www.mia...bf7fd8b61.jpeg getting closer to putting the wheels on and having a roller. |
Poly windshield in
https://cimg3.ibsrv.net/gimg/www.mia...f326edc0e.jpeg https://cimg5.ibsrv.net/gimg/www.mia...7d9e29d25.jpeg https://cimg6.ibsrv.net/gimg/www.mia...a273cf7d6.jpeg Put the front bumper on to see how it would fit. Need to do some quick disconnects. https://cimg1.ibsrv.net/gimg/www.mia...31fda5506.jpeg Probably should have kept some of the stock housing on these. Now I need to figure out a way to mount them. https://cimg7.ibsrv.net/gimg/www.mia...45d49e766.jpeg |
|
Ditched the brake booster
https://cimg1.ibsrv.net/gimg/www.mia...21748ed4d.jpeg https://cimg9.ibsrv.net/gimg/www.mia...dcdc3b6f6.jpeg Got my harmonics in balance https://cimg5.ibsrv.net/gimg/www.mia...590c0729d.jpeg |
Dash is in
https://cimg0.ibsrv.net/gimg/www.mia...d2745d76b.jpeg https://cimg3.ibsrv.net/gimg/www.mia...c4eeb5c11.jpeg headlight blanks are mounted. https://cimg9.ibsrv.net/gimg/www.mia...28067f979.jpeg clutch/flywheel installed https://cimg4.ibsrv.net/gimg/www.mia...d8bc6cfd9.jpeg |
Slow day today as I had some commitments outside of the garage
quick releases added to the bumper https://cimg2.ibsrv.net/gimg/www.mia...f7233d6f3.jpeg https://cimg5.ibsrv.net/gimg/www.mia...1ef97639f.jpeg put my new steering wheel on the hub https://cimg9.ibsrv.net/gimg/www.mia...a8050592e.jpeg |
Making room for the wheel/tire combo. Temporary install with self tapers. Enough to make the marks and get to cutting.
https://cimg7.ibsrv.net/gimg/www.mia...7981f1181.jpeg |
Hot side arrived fresh with its ceramic coating.
https://cimg6.ibsrv.net/gimg/www.mia...3c4720886.jpeg Didn’t waste anytime and got it on the motor https://cimg1.ibsrv.net/gimg/www.mia...799958ae3.jpeg Flares are actually covering some cuts now https://cimg2.ibsrv.net/gimg/www.mia...e30d2ceed.jpeg |
Rivnuts in, flares painted
https://cimg1.ibsrv.net/gimg/www.mia...b9fed9208.jpeg Making room in an attempt to not cut a tire. Wish I would have done this prior to cutting the fenders and prior to front of the car back together. https://cimg4.ibsrv.net/gimg/www.mia...65d79b157.jpeg https://cimg6.ibsrv.net/gimg/www.mia...f810a3f21.jpeg |
Something oddly satisfying about making/assembling these.
https://cimg8.ibsrv.net/gimg/www.mia...4c098f1f7.jpeg https://cimg9.ibsrv.net/gimg/www.mia...670a65742.jpeg |
Cussed a bit, but these are together.
https://cimg0.ibsrv.net/gimg/www.mia...694b83e56.jpeg https://cimg2.ibsrv.net/gimg/www.mia...cd6d35094.jpeg |
Got to see this thing in person yesterday, great work so far, Adam! Now I just need to figure out how to make my child-bearing hips fit into a 15" Kirkey so I can beg for a co-drive, lol
|
Originally Posted by boileralum
(Post 1618708)
Got to see this thing in person yesterday, great work so far, Adam! Now I just need to figure out how to make my child-bearing hips fit into a 15" Kirkey so I can beg for a co-drive, lol
|
Went with the electric valve on this to not have to think about it. Ruined my plan to mount it horizontally.
https://cimg4.ibsrv.net/gimg/www.mia...ccad8a376.jpeg |
Is this a milestone? I believe this is a milestone. Feels low as hell after walking past it on the quickjacks the last 6 months.
https://cimg4.ibsrv.net/gimg/www.mia...6bb9650f2.jpeg |
Looks awesome man! Where did you get the water pump outlet/ mixing manifold replacement?
|
Originally Posted by Afaraj
(Post 1618795)
Looks awesome man! Where did you get the water pump outlet/ mixing manifold replacement?
https://www.overkillbydesign.com/sho...ter-pump-inlet Believe Hawley makes one as well. |
Originally Posted by mr20turbo
(Post 1618803)
Here you go.
https://www.overkillbydesign.com/sho...ter-pump-inlet Believe Hawley makes one as well. |
I have a ton of stuff to button up, but cleared some hurdles this weekend.
https://cimg9.ibsrv.net/gimg/www.mia...f23fe3a38.jpeg https://cimg0.ibsrv.net/gimg/www.mia...9dee8547b.jpeg https://cimg2.ibsrv.net/gimg/www.mia...ba0ed2d45.jpeg https://cimg5.ibsrv.net/gimg/www.mia...9a27d1503.jpeg https://cimg9.ibsrv.net/gimg/www.mia...71c28f5a7.jpeg https://cimg8.ibsrv.net/gimg/www.mia...23c291ccd.jpeg |
Made a hole and covered said hole
https://cimg8.ibsrv.net/gimg/www.mia...5dc3dc00f.jpeg https://cimg9.ibsrv.net/gimg/www.mia...510726337.jpeg https://cimg0.ibsrv.net/gimg/www.mia...851f8e8d1.jpeg connected some things https://cimg1.ibsrv.net/gimg/www.mia...b281acd5e.jpeg |
The hoods final form
https://cimg3.ibsrv.net/gimg/www.mia...9e11f88b6.jpeg Now that the transmission is in, the vanity plate can go on https://cimg0.ibsrv.net/gimg/www.mia...1522b7626.jpeg |
Radiator in. Hoses ran. Fuel system done. Hydraulic throw out bearing plumbed.
https://cimg3.ibsrv.net/gimg/www.mia...1b1126349.jpeg https://cimg7.ibsrv.net/gimg/www.mia...288b9da51.jpeg |
Spark makers installed and got the accusump plumbed
https://cimg2.ibsrv.net/gimg/www.mia...9d0b0045e.jpeg https://cimg3.ibsrv.net/gimg/www.mia...ba5060abd.jpeg |
It’s on the move. Loaded it on the trailer for Blake at Bluegrass Race Electronics to do his work. Also, my friend fits in a Miata well.
https://cimg6.ibsrv.net/gimg/www.mia...876cbaa15.jpeg https://cimg8.ibsrv.net/gimg/www.mia...578f7f599.jpeg https://cimg0.ibsrv.net/gimg/www.mia...0c2a99a75.jpeg https://cimg2.ibsrv.net/gimg/www.mia...ce37c9bd4.jpeg |
Am I seeing two brake pressure sensors cantilevered off the ABS unit? I'd be looking to support them, or switch them to vertical and take the line out horizontally.
That's a nice neat interior though! |
Originally Posted by Gee Emm
(Post 1619824)
Am I seeing two brake pressure sensors cantilevered off the ABS unit? I'd be looking to support them, or switch them to vertical and take the line out horizontally.
That's a nice neat interior though! Thanks on the interior comment. Spent some time on it where it would look minimized yet finished (for a stripped interior anyway.) feel like I met the goal. Edit: side note, still running that autronic in your signature? have one in my mr2. way ahead of it's time. |
You did good!
Yes, still running the Autronic. The biggest drawback is it doesn't do CAN, but I am happy enough with the serial output. |
Jealous of the Nexus... Planning to run a PDM/PMU with it? Also what trans is that?
|
Originally Posted by Downmented
(Post 1619894)
Jealous of the Nexus... Planning to run a PDM/PMU with it? Also what trans is that?
|
More updates from Blake at Bluegrass Race Electronics.
ecs really knows how to package a terminal/heat shrink order https://cimg4.ibsrv.net/gimg/www.mia...7bdbc6e64.jpeg 117 connectors heading into the haltech https://cimg9.ibsrv.net/gimg/www.mia...e57f4462a.jpeg https://cimg1.ibsrv.net/gimg/www.mia...f05d1a038.jpeg https://cimg3.ibsrv.net/gimg/www.mia...2f6cc34ab.jpeg up next, mk60 and engine harness |
Originally Posted by mr20turbo
(Post 1620329)
More updates from Blake at Bluegrass Race Electronics.
ecs really knows how to package a terminal/heat shrink order https://cimg4.ibsrv.net/gimg/www.mia...7bdbc6e64.jpeg 117 connectors heading into the haltech Your wiring looks super professional…car looks great too! Nice Job! |
Complete chassis and engine harness. The entire reason I went with the nexus in this picture. It makes for a really clean install.
https://cimg0.ibsrv.net/gimg/www.mia...4f94600be.jpeg |
Originally Posted by mr20turbo
(Post 1620493)
Complete chassis and engine harness. The entire reason I went with the nexus in this picture. It makes for a really clean install.
https://cimg0.ibsrv.net/gimg/www.mia...4f94600be.jpeg That is absolutely beautiful, the nexus features deff have me considering the switch from the Elite series... |
man, i'm going to get in toruble with the wife but i'll be damned if i don't get this coil setup.
another Q, what are you using for Knock Sensor? https://cimg5.ibsrv.net/gimg/www.mia...d4c77b0df8.jpg |
Originally Posted by Alejo_NIN
(Post 1620513)
another Q, what are you using for Knock Sensor?
|
Originally Posted by mr20turbo
(Post 1620515)
It is a ls3 knock sensor. Cheap. Dependable.
thanks! hows the electric steering? i did the same setup with the Saturn VUE....are you controlling the CAN through the haltech? |
Originally Posted by Alejo_NIN
(Post 1620516)
effing nice, on my amazon cart already ;)
thanks! hows the electric steering? i did the same setup with the Saturn VUE....are you controlling the CAN through the haltech? |
Originally Posted by mr20turbo
(Post 1620521)
Haven't used it yet, however liked the setup in Shawn's car. I skipped running it through the haltech. The power requirement take A LOT of inputs and the typical resistor knob made the most sense.
thanks man! |
Went over to check on the car today and to knock out a couple things needed for startup. Test fit the mock up of the restrictor and got the swaybar/lower radiator hose on.
https://cimg6.ibsrv.net/gimg/www.mia...c89bd2291.jpeg https://cimg8.ibsrv.net/gimg/www.mia...8c413c11c.jpeg |
|
You could have staged that pic so much better for a miata group, just saying ;-)
|
Originally Posted by boileralum
(Post 1620795)
You could have staged that pic so much better for a miata group, just saying ;-)
|
have you thought about spacing up the rack n pinion?
i'm not sure but that angles is a bit high....
Originally Posted by mr20turbo
(Post 1620582)
Went over to check on the car today and to knock out a couple things needed for startup. Test fit the mock up of the restrictor and got the swaybar/lower radiator hose on.
https://cimg6.ibsrv.net/gimg/www.mia...c89bd2291.jpeg |
Originally Posted by Alejo_NIN
(Post 1620834)
have you thought about spacing up the rack n pinion?
i'm not sure but that angles is a bit high.... |
All times are GMT -4. The time now is 07:17 PM. |
© 2024 MH Sub I, LLC dba Internet Brands