Bulbasaur, evolve to Ivysaur! (budget turbo build content inside)
33 Attachment(s)
A little background on myself. I'm a ME student about to graduate and a turbo noob, but I'm here to learn. I've sourced together a turbo kit last summer and bailed last minute because I was a bitch. But that won't happen again. I'm open to any feedback, good or bad, so feel free to critic my build to keep me in the right direction.
Meet my 1991 BRG miata (aka Bulbasaur). I've done a lot of supporting mods over the past year or so and he is now ready to be turbo'd (evolve to Ivysaur). And in case anyone was wondering, Venusaur evolution occurs when I have enough spare money and fabrication skill to motor swap it (all motor k24 maybe?). And if you guys aren't Pokémon fans... deal with it. :dealwithit: https://encrypted-tbn2.gstatic.com/i...jGNTbLwZQXM8Qw This is my weekend car which I hope to take to the track occasionally so I'm shooting for a pretty reliable 180 rwhp and then go from there. Hopefully the boost isn't as addicting as everyone says it is so I'm not tempted to blow the motor. Anyway, words < lists < pics.... So i'll save the best for last Details/Supporting mods: 330k miles on chassis :giggle: 1.6 motor long nose motor (60k miles) 4.1 torsen swap 1.8 brakes with hawk HP+ pads Mazda Comp Mounts FM frame rails Poly Control arm Bushings Poly Diff Bushings M-tuned coolant re-route Magnecor wires 8 lb F1 racing flywheel ACT 1.6 Clutch Koni yelow, GC, FCM ISC FM sway bar 15x9 6ul with 225 RS3 Hard dog double diagonal Sprint racing setas G-force 5-point harness DNA radiator with fans Turbo kit Plans: Old style FM log mani + DP GT2560 DIYPNP RC440 or 550 injectors 3 in exhaust LC1 wideband CXracing intercooler + piping Recirc bov The pics: How it sits now: https://www.miataturbo.net/attachmen...ine=1375193325 How I bought it: https://www.miataturbo.net/attachmen...ine=1374855941 https://www.miataturbo.net/attachmen...ine=1374855941 https://www.miataturbo.net/attachmen...ine=1374855941 https://www.miataturbo.net/attachmen...ine=1374855941 https://www.miataturbo.net/attachmen...ine=1374855941 https://www.miataturbo.net/attachmen...ine=1374855941 https://www.miataturbo.net/attachmen...ine=1374855941 https://www.miataturbo.net/attachmen...ine=1374855941 https://www.miataturbo.net/attachmen...ine=1374855941 https://www.miataturbo.net/attachmen...ine=1374855941 https://www.miataturbo.net/attachmen...ine=1374855941 https://www.miataturbo.net/attachmen...ine=1374855941 https://www.miataturbo.net/attachmen...ine=1374855941 https://www.miataturbo.net/attachmen...ine=1374855941 https://www.miataturbo.net/attachmen...ine=1374855941 https://www.miataturbo.net/attachmen...ine=1374855941 https://www.miataturbo.net/attachmen...ine=1374855941 https://www.miataturbo.net/attachmen...ine=1374855941 https://www.miataturbo.net/attachmen...ine=1374855941 https://www.miataturbo.net/attachmen...ine=1374855941 https://www.miataturbo.net/attachmen...ine=1374855941 https://www.miataturbo.net/attachmen...ine=1374855941 https://www.miataturbo.net/attachmen...ine=1374855941 https://www.miataturbo.net/attachmen...ine=1374855941 https://www.miataturbo.net/attachmen...ine=1374855941 https://www.miataturbo.net/attachmen...ine=1374855941 https://www.miataturbo.net/attachmen...ine=1374855941 https://www.miataturbo.net/attachmen...ine=1374855941 http://i1089.photobucket.com/albums/...0825-00238.jpg https://www.miataturbo.net/attachmen...ine=1374855941 https://www.miataturbo.net/attachmen...ine=1374855941 More updates coming soon :drool: |
:sadwavey: PS: :brain: , Please build me a Megasquirt :sadwavey:
edit: Megasquirt has been ordered. Thanks Brain! |
10 Attachment(s)
I came home to find this at my door
https://www.miataturbo.net/attachmen...ine=1375194219 So i opened it to inspect the parts https://www.miataturbo.net/attachmen...ine=1375194219 https://www.miataturbo.net/attachmen...ine=1375194219 https://www.miataturbo.net/attachmen...ine=1375194219 I also replaced these: https://www.miataturbo.net/attachmen...ine=1375194219 with these: https://www.miataturbo.net/attachmen...ine=1375194219 https://www.miataturbo.net/attachmen...ine=1375194219 Then took it on a little test drive up Glendora Mountian Rd. The weather was nice so I snapped a few pics (please excuse me extremely amateur photography skills). https://www.miataturbo.net/attachmen...ine=1375194219 https://www.miataturbo.net/attachmen...ine=1375194219 Then I came home and read up on some turbo info. The second read through definitely helped on some more complicated aspects: https://www.miataturbo.net/attachmen...ine=1375194219 The intercooler and piping should be on its way then I just need a few nick nack parts like oil return fitting to compete the kit. My DIYPNP will hopefully arrive some time next week so I can get familiar with the software on a stock car first Questions: Does anyone in So Cal know a good local shop to clean and flow test injectors for a reasonable price? Also, the downpipe has a good amount of surface rust on it. Would it be best to sand it off and self etch primmer then high temp paint it to prevent it from getting more rusty? |
Looks like you've done a decent amount of research before starting on the turbo, props for that.
330k miles on the chassis, that's pretty impressive. I assume you got the car for especially cheap? My kid brother would probably appreciate the Pokemon references....he's also a jobless 25 year old man... |
Originally Posted by Efini~FC3S
(Post 1038546)
My kid brother would probably appreciate the Pokemon references....he's also a jobless 25 year old man... |
Originally Posted by Efini~FC3S
(Post 1038546)
Looks like you've done a decent amount of research before starting on the turbo, props for that.
330k miles on the chassis, that's pretty impressive. I assume you got the car for especially cheap? My kid brother would probably appreciate the Pokemon references....he's also a jobless 25 year old man... I'm 21 and employed and will never be too old for pokemon references. https://encrypted-tbn2.gstatic.com/i...jGNTbLwZQXM8Qw |
6 Attachment(s)
I finally made it out to my first track day and got the chance to push this car to it's limit (well, not really since I'm a very novice driver still) and see how all the hours a put into my car payed off. The track was streets of willow CW and it was blazing hot. I opted to pay for a ride along instructor for the day which was very helpful getting me comfortable out there quickly.
I shaved a second or 2 off each run and got my lap time down to 1:40.9. My rs3s seemed to start giving out after 5 laps tho, but the rest of the car performed great and handled all the abuse. I can't wait to get out there again, while still natural aspirated, and break into 1:3X. Needless to say, It was a blast (besides my speeding ticket I got on the way up going 80 mph in a 70, aka flow of traffic, which is 2 hours from my house if I want to contest it... fml). Enough rambling, here are some pics: https://www.miataturbo.net/attachmen...ine=1375716562 https://www.miataturbo.net/attachmen...ine=1375716562 https://www.miataturbo.net/attachmen...ine=1375716562 https://www.miataturbo.net/attachmen...ine=1375716562 https://www.miataturbo.net/attachmen...ine=1375716562 https://www.miataturbo.net/attachmen...ine=1375716562 |
Inb4 cancelled turbo build, spends all money tracking/racing...
|
9 Attachment(s)
Originally Posted by Efini~FC3S
(Post 1040280)
Inb4 cancelled turbo build, spends all money tracking/racing...
It's been way to hot last few weeks to get much done but I believe I'm just about turbo ready. Over the past month I have installed -DIYPNP (thanks Brain!) -IAT sensor -BMW VTPS -AEM EUGO -autometer boost gauge -toyota COPS (thanks FRT_Fun) <-- easiest install of my life -RC 440cc injectors I decided to go reuse the beginning pieces of my old style FM kit for the intercooler piping. The plan is to go 2 in from turbo outlet then bend down and increase it to 2.25, to the intercooler and cut down the 2.5 to 2 in throttle body piece to match the 2.25 piping. https://www.miataturbo.net/attachmen...ine=1377885163 https://www.miataturbo.net/attachmen...ine=1377885163 https://www.miataturbo.net/attachmen...ine=1377885163 https://www.miataturbo.net/attachmen...ine=1377885163 https://www.miataturbo.net/attachmen...ine=1377885163 https://www.miataturbo.net/attachmen...ine=1377885163 https://www.miataturbo.net/attachmen...ine=1377885163 https://www.miataturbo.net/attachmen...ine=1377885163 https://www.miataturbo.net/attachmen...ine=1377885163 VEAL is an awesome piece of software by the way. It makes tuning air fuel ratios a piece of cake. After only 10 min of tuning the car feels pretty solid with the COP and RC 440s. I just need to fine tune it and then the real fun of the build can start. Next on the list is mounting the intercooler and routing the piping. 2 weeks to school starts. It's crunch time! . |
Looks like a solid build. Can't wait to see it with boost!
|
12 Attachment(s)
Made some good progress on the build this weekend. Got a lot done on saturday. Then ran my first marathon on sunday and spent the rest of the long weekend recovering. However, it worked out well since I needed to order some parts I was missing. Hopefully the nick nack pieces will arrive by this weekend to complete the build.
Intercooler mounting wasn't too bad. Just took $12 worth of aluminum, a drill and cut off wheel. The goal was to get it mounted closer to the radiator with the same gap as the AC condenser I removed. I think it turned out well. https://www.miataturbo.net/attachmen...ine=1378316696 https://www.miataturbo.net/attachmen...ine=1378316696 https://www.miataturbo.net/attachmen...ine=1378316696 https://www.miataturbo.net/attachmen...ine=1378316696 https://www.miataturbo.net/attachmen...ine=1378316696 https://www.miataturbo.net/attachmen...ine=1378316696 https://www.miataturbo.net/attachmen...ine=1378316696 https://www.miataturbo.net/attachmen...ine=1378316696 PB blasted the shit out of the old studs. And installed my inconnel stud kit. I don't think I'm fast enough to break studs yet so hopefully the m8 will hold up fine. https://www.miataturbo.net/attachmen...ine=1378316696 https://www.miataturbo.net/attachmen...ine=1378316696 https://www.miataturbo.net/attachmen...ine=1378316696 . |
So I have the same intercooler as you, and was going to mount it similarly. I was worried about pulling it up as high as you did though in case those tabs that the AC condenser bolted to start rubbing the end tanks. I was going to put some of that rubber covered U channel dealio that you use as trim for sharp metal on it. Just throwing that out there.
Do those 180 bends that came with it clear your tires at full lock? |
Originally Posted by rigidbigelsworth
(Post 1050271)
So I have the same intercooler as you, and was going to mount it similarly. I was worried about pulling it up as high as you did though in case those tabs that the AC condenser bolted to start rubbing the end tanks. I was going to put some of that rubber covered U channel dealio that you use as trim for sharp metal on it. Just throwing that out there.
Do those 180 bends that came with it clear your tires at full lock? I think as is it will clear. But that was just test fitment. I am going to cut them down as much as possible to keep it as inward as possible. |
I loled at the KY Jelly part... Warming sensation made my balls burn for hours...
|
11 Attachment(s)
:yippee: I HAZ TURBO! :yippee:
All that's left is to install my 3 in exhaust, boost gauge and tiddy up some stuff. Then tune, drive and profit. Because I like pokemons: https://www.miataturbo.net/attachmen...ine=1378741983 A quick video because I'm so excited- It's upside down for the Australians (too lazy to fix) EDIT: NVM, fixed WTF!! why you no oil feed port!!! Bought the adapter and everything from BEGI to find out my block doesn't have the port threaded and plugged. I think this engine might be a Japan import which my explain it. Anyway that caused a big headache of running around sourcing parts over the weekend to tee off the oil sender. https://www.miataturbo.net/attachmen...ine=1378741875 drilled some holes: https://www.miataturbo.net/attachmen...ine=1378741875 Tapped: https://www.miataturbo.net/attachmen...ine=1378741875 I was sick of breaking those gay plastic radiator fan tabs so I gheto fabbed some brackets out of crap I had laying around. It's ain't pretty but it worked perfectly. https://www.miataturbo.net/attachmen...ine=1378741875 https://www.miataturbo.net/attachmen...ine=1378741875 Heat wrapped some crap. https://www.miataturbo.net/attachmen...ine=1378741875 Mounted manifold: https://www.miataturbo.net/attachmen...ine=1378741875 IC piping routed https://www.miataturbo.net/attachmen...ine=1378741875 Fixed coolant reroute using a random rad hose and cut this pipe to use as a coupler. https://www.miataturbo.net/attachmen...ine=1378741875 https://www.miataturbo.net/attachmen...ine=1378741875 Side note: me and my buddy pulled this engine to replace his blown one. Took us one hour flat in some guys drive way. New record for us. http://i36.photobucket.com/albums/e1...907_110255.jpg
Originally Posted by Mazduh
(Post 1050350)
I loled at the KY Jelly part... Warming sensation made my balls burn for hours...
. |
Why in the world would you replace good shocks with the world's worst shocks?
|
Originally Posted by Braineack
(Post 1051665)
Why in the world would you replace good shocks with the world's worst shocks?
|
how's your spine?
and why do you have isc racing tophats on koni shocks? are you trying to coil bind? or are you CRnet low? |
Originally Posted by Braineack
(Post 1051779)
how's your spine?
and why do you have isc racing tophats on koni shocks? are you trying to coil bind? or are you CRnet low? They came with the suspension. 4.75 and 4.5 pinch weld (IRC). I haven't had any coil binding issues yet. If something does come up I'll make some adjustments. |
Nice to see the long hard evolution combined into three solid forum posts
|
All times are GMT -4. The time now is 12:54 PM. |
© 2024 MH Sub I, LLC dba Internet Brands