EBC ordered and should be installed in the next few days. Then dyno tune at the end of the week. So excited.
Originally Posted by mgcordato
(Post 1056623)
Nice to see the long hard evolution combined into three solid forum posts
:yippee: Hi Matt :yippee: ^ Credit goes to this guy. He helped with alot of this build and many of my misc miata adventures. This build would not have been possible without him. He should be boosted too real soon. |
:yippee: Hi Matt :yippee:
^ Credit goes to this guy. He helped with alot of this build and many of my misc miata adventures. This build would not have been possible without him. He should be boosted too real soon.[/QUOTE] Brings a tear to my eye...Thanks Chris. Finally getting around to making my "noob" posts and actually use the forum. I hope to see your car dyno tuned very soon and running ALL the boost :giggle::giggle::giggle: |
Sometimes I feel like the emphasis on padding kids' self esteems has worked too well, resulting in unapologetic Pokemon and Brony man-boys.
On the other hand, kudos for the progress and the marathon. |
1 Attachment(s)
Originally Posted by Scrappy Jack
(Post 1056651)
Sometimes I feel like the emphasis on padding kids' self esteems has worked too well, resulting in unapologetic Pokemon and Brony man-boys.
On the other hand, kudos for the progress and the marathon. Thanks! Marathon kicked my ass. I hope to break into 3:XX for the next one. |
1 Attachment(s)
Very nice build.
Needs more VVT. Props for pokemans and ponies. https://www.miataturbo.net/attachmen...ine=1380062582 |
6 Attachment(s)
It's been a while since an update. The miata didn't get worked on much during my senior year of school due to my work, schooling but mostly FSAE :crx: Even after graduating most of my time was spent in the school shop till we completed our three comps. Here's some off topic pics from tire temp testing and the Germany competition.
I'm still considering if I want to build an IR tire temp Array system for the miata. I have the DAQ and programing all done. I just need to figure out a bracket system and wiring which is easier said than done. We should have made it one PCB board to start off with https://www.miataturbo.net/attachmen...ine=1411103077 3D printed the brackets at home https://www.miataturbo.net/attachmen...ine=1411103077 Our driver drifted into a cone braking a bracket. I should have reinforced it with bracing. We got some good test data before hand at least. https://www.miataturbo.net/attachmen...ine=1411103077\ Germany was an amazing experience. It was my first time out of the country and I couldn't have asked for a better trip. Competing in the Hockenheimring and sharing pits where F1 cars was neat. The team placed 9th overall and 1st in cost. We were surprisingly competitive with the cost of our car we beat many teams with budget 8x our own. http://i36.photobucket.com/albums/e1...8/IMG_3718.jpg We had the most bare and empty pit of all teams there. https://www.miataturbo.net/attachmen...ine=1411103077 This is how you get a car from California to Germany. #Tetris https://www.miataturbo.net/attachmen...ine=1411103077 This is just one of the amazing cars at comp. The level of worksmanship it amazing that a group of college kids could build such a machine. https://www.miataturbo.net/attachmen...ine=1411103077 |
8 Attachment(s)
Okay, on to the relevant stuff. I have decided to switch this car to a weekend car with the occasional tack event, to a more dedicated track car that can still be driven on the street. I started with the easy stuff. Some weight savings. Gutted the AC, heat core, blower, cut the dash, pulled carpets and painted the interior.
https://www.miataturbo.net/attachmen...ine=1411103618 Stupid sound tarr crap https://www.miataturbo.net/attachmen...ine=1411103618 https://www.miataturbo.net/attachmen...ine=1411103618 Currently the car has the turbo kit removed to pass smog so I decided to reclock the turbo outlet down for more efficient piping routing. While I was at it I ported the wastegate and cleaned up a rough section of the manifold. https://www.miataturbo.net/attachmen...ine=1411103618 Before (sharp corner) https://www.miataturbo.net/attachmen...ine=1411103618 After (probably didn't help much but couldn't have hurt) https://www.miataturbo.net/attachmen...ine=1411103618 Fabed this up real quick. Hopefully aluminum doen't fatigue to quickly https://www.miataturbo.net/attachmen...ine=1411103618 Checked my injectors at my work place. looks like they check out okay. https://www.miataturbo.net/attachmen...ine=1411103618 Slowly tackling a list of projects I have planned for this car. I hope to get it running again really soon. |
Curious about how that bracket holds up.
I'm sure there's a reason no one makes them in aluminum for any turbo. I'm considering making one just like that out of steel good to see you progressing btw - and those FSAE cars look crazy fun |
Originally Posted by 18psi
(Post 1168507)
Curious about how that bracket holds up.
I'm sure there's a reason no one makes them in aluminum for any turbo. I'm considering making one just like that out of steel good to see you progressing btw - and those FSAE cars look crazy fun |
19 Attachment(s)
Interior all finished
https://www.miataturbo.net/attachmen...ine=1414731017 roll bar painted as well https://www.miataturbo.net/attachmen...ine=1414731017 $40 hard top paint job with this funky color using a foam roller https://www.miataturbo.net/attachmen...ine=1414731017 Used a digitizing arm to get CAD data of the radio bezel https://www.miataturbo.net/attachmen...ine=1414731017 sketched this out to 3D print (very rough first pass just to get something functional) https://www.miataturbo.net/attachmen...ine=1414731017 Plug and play headlight motor and hazard switchs https://www.miataturbo.net/attachmen...ine=1414731017 new switch bezel wired up https://www.miataturbo.net/attachmen...ine=1414731017 Don't mind the funny texture and poor fitment. This is just a temporary to get something functional in there. switch are power windows, hazzards and flip light. two extra switches for whatever my imagination comes up with in the future... ejector seat, NOS activator like that jdm fast in the furisous thing, banana trap release like mario kart. the possibilities are unlimitless https://www.miataturbo.net/attachmen...ine=1414731017 I got to use a lift for the miata for the first time ever :) Installed some adjustable end links https://www.miataturbo.net/attachmen...ine=1414731017 new bushings https://www.miataturbo.net/attachmen...ine=1414731017 |
Originally Posted by cyotani
(Post 1179944)
roll bar painted as well
https://www.miataturbo.net/attachmen...ine=1414731017 --Ian |
Originally Posted by codrus
(Post 1179947)
Why harness bar *and* harness tabs?
--Ian |
10 Attachment(s)
Getting the car set up to be a track rat whore for 2015. New used xidas 750/400 w/ helpers. Corner weighed and aligned. Fixed my clutch leak issue that was the cause of my tow of shame from my last track day. New Exedy master, slave and SS line should do the trick.
https://www.miataturbo.net/attachmen...ine=1421552562 with driver and 1/2 tank gas https://www.miataturbo.net/attachmen...ine=1421552562 w/o driver and 1/2 tank gas https://www.miataturbo.net/attachmen...ine=1421552562 Leaving this here for easy reference for myself since I tend to loose and forget things. https://www.miataturbo.net/attachmen...ine=1421552562 https://www.miataturbo.net/attachmen...ine=1421552562 |
getting more balleur with every post.
very nice. |
Originally Posted by 18psi
(Post 1197626)
getting more balleur with every post.
very nice. |
8 Attachment(s)
A random assortment of pictures. Not in chronological order.
Tow of Shame from streets of willow in december (a hose joint from the coolant reroute rubbed through my clutch soft line). Replaced it with a stainless line https://www.miataturbo.net/attachmen...ine=1422239207 DIY radiator thingy http://i36.photobucket.com/albums/e1...ne%20237_2.jpg Who needs a pickup truck for engine transport when you have a toyota camry? https://www.miataturbo.net/attachmen...ine=1422239207 Fits like a glove https://www.miataturbo.net/attachmen...ine=1422239207 first time using the solevant cleaning tank at work https://www.miataturbo.net/attachmen...ine=1422239207 Much better... https://www.miataturbo.net/attachmen...ine=1422239207 Roadster Cup at Streets of Willow on 1/24/15 https://www.miataturbo.net/attachmen...ine=1422239207 https://www.miataturbo.net/attachmen...ine=1422239207 Did some IR tire temp testing. I had connectivity issues due to bad wiring and only had the rear sensors installed. This is what temps looked like after the cool down lap and car parked. https://www.miataturbo.net/attachmen...ine=1422239207 No video from the track day, but this DIY sequential shift light worked better than expected. It was clearly visible with peripheral vision. I never had to look directly at my Tach the entire day. Last time at the track I bounced off the rev limiter here and there. With this I don't think I hit it at all. :party: |
7 Attachment(s)
I finally got around to installing my DIYPNP back on my stock motor. I'm hopefully going to get a chance to run it on the dyno at work and learn me a little tuning. In prep for that. Heres some random pics from the last week.
3D printed TB elbow piece to run a pipe and filter to driver side head light https://www.miataturbo.net/attachmen...ine=1422943804 before acetone vapor smoothing (.013 layer height) https://www.miataturbo.net/attachmen...ine=1422943804 my crock pot rig (ceramic takes way to long to heat up, I should have went with a rice cooker) https://www.miataturbo.net/attachmen...ine=1422943974 After: Smooths out the layers and helps seal the part. (smudge marks are from me touching it before it fully cured) https://www.miataturbo.net/attachmen...ine=1422943804 Some flyin miata goodies went in https://www.miataturbo.net/attachmen...ine=1422943804 DIY electric Det Can from another thread on here. ($12 in materials. Thanks Radioshack for the 25% off going out of business sell!) https://www.miataturbo.net/attachmen...ine=1422943804 This one has two mics. Makes for good redundancy or to use on both sides of a V8 http://i36.photobucket.com/albums/e1...8/IMG_5785.jpg Arts and crafts https://www.miataturbo.net/attachmen...ine=1422943804 Finished Product! I accidentally ripper a soldered joint on the second mic so I only have one functional mic now http://i36.photobucket.com/albums/e1...8/IMG_5787.jpg |
Looking good man, glad you are getting in the game! I really really want a 3d printer after seeing your(awesome) throttle body elbow. I could make so many parts with it.
Your fab skills are crazy good, wiring too. |
Originally Posted by Jeffbucc
(Post 1202439)
Looking good man, glad you are getting in the game! I really really want a 3d printer after seeing your(awesome) throttle body elbow. I could make so many parts with it.
Your fab skills are crazy good, wiring too. I ended up using my BEGI elbow from my turbo kit and mounted my filter closer near the bumper opening rather than the driver side headlight so this most likely will never get used. I used my work's printer for that one. My 3D printer kind of sucks at support features for complicated overhangs. |
1 Attachment(s)
|
All times are GMT -4. The time now is 03:24 PM. |
© 2024 MH Sub I, LLC dba Internet Brands