So how that car run, it'a beast or what?

I never got a ride in it :( . I was just showing him the ropes with a few settings and then I loaded in brain's old timing map.

He had the stock DIY PNP map on with his low compression pistons. SO MUCH room to play. There is still a lot that car can go before it is considered agressive timing tho. . . But I think a det can tune might be a good idea.

Good to see it's coming alond. In for videos of said launch control

How'd you not get a ride in it?! Thats like an unwritten car guy rule....you always gotta go for a rip :giggle:

Brains map is definitly a good starting point. I was amazed with the difference it made on my car. I've been making a few changes here and there with it and I think I got it dialed in pretty good for my car. I could probably be a bit more aggressive, but I'd like to do that work on a dyno or with a helper on the street (Pain in the ass driving, listening to the detcans, and making adjustments all at once) The det cans are key. They have been my number one tool lately since they make me feel more comfortable making adjustments. Otherwise I'd have no idea on if the changes I'm making are good or bad.

K long time with no updates, i got my RC750's in the car running awesome and i took the kelford cams back out, its still up in the air what i want to do with them, but here's a few pics. Also my wife did a photo shoot last week and we got to include my car in a few shots, they came out pretty damn cool, lemme know what you guys think!

Attachment 198072
Attachment 198073
Attachment 198074
Attachment 198075
Attachment 198076
Attachment 198077
Attachment 198078
Attachment 198079

Wish I had the money right now for those cams. Your wife is a hotty

very nice.

1) Pike this weekend? saturday? Ill have the miata out.
2) Ill call you back about MS sometime this week. basicly there are cheaper pnp options for your buddies car than me
3) keep the cams

Dave sounds good, im racing the stupid 600hp sti on friday hopefully. Id like to get a few logs in before that, maybe tune for race gas as well. 30psi on pump is holding up great right now but im still hella week on timing and hella rich on fuel. Spins in 4th gear though! lol

uhg make it saturday. i have time to tune your crap a little bit on saturday so you arent running crazy rich

no biggie man, it can wait, ill run him and see how i do. If i need more powa, ill race him again at a later date. I wont be around saturday.

Just do a few "Long" logs and run VE analyzer in mega log viewer like we were the other night. After a few you should have your fuel dialed in pretty well, not perfect, but damn good. Your spark table is pretty good...theres power to be had, but I think once you get your fuel dialed in you'll be happy :giggle: What do your afr's look like in boost right now? If you need a hand for like an hour or so, I'm not doin shit tomorrow night.

Now, what I wanna know is when your putting that kid Mark in his place lol.


Is that Lyman Orchards?

30psi? Now I really wanna see some videos!!!

A few questions on your turbo--

I looked on the garrett website and i can't find your turbo. :( Would you mind posting a link to the page? I was curious about the compressor map. Also which size compressor are you using?

I ask since I'm curious how this turbo compares to the GT30 and GT35. thanks

P.S. Please whup on the STI-- there are quite a few 500+hp sti's and evos in my area :)

60-1 is an older turbo. You wont find much about it because it isn't "current" with the new GT series turbos.

http://www.turbocharged.com/catalog/...mages/Fig9.gif

Thank you!

I'm confused--- if fastcolt is running 30psi, that is pretty durn far off the efficiency map. I dunno his altitude but he needs 51psi absolute to hit 500hp crank which um works out to a pressure ratio of over 3.5.

If I am reading the map right, the car should be sized well enough for around 325 crank but not much more? Looks like the modern equivalent would be a 2871 or 6???

I dont have 500hp right now. If im lucky im barely scrapping 400. This turbo made 381hp on pump gas @ 25psi on Jtothawhat's 1.6. Im at 30psi, im sure im close to if not over 400. Not too many things scare me in life.....this car does.....

I doubt my ability to comprehend compressor maps. Nyways TTU to you and your build! What is your RPM redline now? Also how is that sprung 4 puck working out for you? I have the ACT 6 puck and IMO it's smooth as a kitten :)

I might have to meet up with you friday just to get a ride. . . ill shoot you a text.

NP Dave, hit me up.

Gods honest truth, clutch is smooth as silk, I love it. And pedal pressure is not bad either.

V



I





D




E



O








S
















PLEASE PLEASE please please