Aidan's loose oily bunghole actually runs a track lap
#6363
SadFab CEO
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
I will start deducting cats as I see fit until this has been accomplished. To show you i'm serious, I have taken one hostage already. It will be returned upon completion of aforementioned task.
Did that work?
#6371
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Had @hi_im_sean throw this together for me so I can test post-cooler oil temp.
Similar to TSE adapter, but the top has a 1/4 npt fitting, with a 1/4-1/8npt adapter. The male is BSPT, and the female on the end is BSPT for the stock pressure sender.
There is a 1/8npt on the other side for oil feed.
Similar to TSE adapter, but the top has a 1/4 npt fitting, with a 1/4-1/8npt adapter. The male is BSPT, and the female on the end is BSPT for the stock pressure sender.
There is a 1/8npt on the other side for oil feed.
Last edited by aidandj; 02-24-2016 at 04:32 PM.
#6374
SadFab CEO
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
I did the best i could. Npt is finicky when stacking **** like that. Use ample rtv to seal and that will give you a bit of wiggle room to adjust tip penetration with the threads.
Lol
Lol