So how many power cards on that JR SC?

First rep-crush, then re-evaluate the need for warnings.

Four, one for each cylinder so I could trim each injector. I also advanced timing by flipping the crank wheel.

This sentence sounded odd, I realize it's because you didn't ask:

How many power cards did you NOT use?

well he's no longer rockin an intercooler, so he's obviously got e-cool or power cards. duhh

Oh no, my props.

ftfy.

Anything new here or did Hustler just give up???

He is currently shopping for a $700 bike frame to save 2 pounds.

I'm sure he could build one out of superfluous swaybars and exhaust parts

I suspect that's easier than eating a bran muffin.

dont you like bran muffins?!

https://www.miataturbo.net/attachmen...ine=1374171015

Nothing new because Hustler doesn't like cars anymore and the car is done. It's the best handling miata in the country, so why mess with perfection? He was crushing all of the drivers in the instructor group at the last track day we did a couple weeks ago. The car is damn good.

He's incapable of having an affordable hobby.

hey cool, i have that same thing hanging in my bathroom!

https://lh6.googleusercontent.com/--...411_170609.jpg

How long did it take you to find the miataturbo shirt before you took the pic?

i didnt find it, it found me and i took a pic.

Strange problem... It appears the water pump belt pulleys don't line up. The SM damper cut one rib off the back side of the belt. The belt is flash with the front of the alternator pulley , slightly less flush at the water pump pulley, and spaced one rib back on the crank damper. Can I shim - out these pulleys?

Tips for removing the alternator pulley in the car?

Something is fucky here. I dont have this problem and I believe we have the same setup here, NA8 alt on a VVT block with some water pump and SM damper.

Tips for removing the alternator pulley without pulling it from the car?

Tips for removing the alternator pulley without pulling it from the car?