Reverant

iTrader: (10)

Seriously, email me a datalog along with your current map. I can't help without them.

hustler

iTrader: (6)

I haven't worked on it recently due to some health issues. I'll let you know later when I start jacking with it again. Thanks for the help, I know it's not your job.

hustler

iTrader: (6)

Just ordered $450 in bullshit:

Sales Order Line Details
Status Part No. Part Description Order Qty Alloc Qty BO Qty Shipped Qty Extended Price PDC Estimated Ship Date Invoice No. Original Part Ordered
Open ZJ10-18-221 SENSOR,CAMSHAFT 1.00 1.00 0.00 0.00 66.25 IC 2012-05-14
Open BP4W-18-221B SENSOR,ANGLE(CRANKSHAFT) 1.00 1.00 0.00 0.00 67.10 IC 2012-05-14
Open NA01-66-350A-00 SWITCH, PWR WNDW 1.00 1.00 0.00 0.00 76.42 IC 2012-05-14
Open BP05-10-235C GASKET,HEAD VALVE 1.00 1.00 0.00 0.00 26.08 IC 2012-05-14
Open MA02-27-238A SEAL,OIL 2.00 2.00 0.00 0.00 9.64 IC 2012-05-14
Open BP05-11-312 SEAL,OIL C/SHAFT 2.00 2.00 0.00 0.00 31.26 IC 2012-05-14
Open B3C7-10-602A OIL SEAL 2.00 2.00 0.00 0.00 8.06 IC 2012-05-14
Open B675-13-158 INSULATOR, FUEL 3.00 3.00 0.00 0.00 12.51 IC 2012-05-14
Open 8574-13-252 GROMMET 4.00 4.00 0.00 0.00 9.64 IC 2012-05-14
Open 8574-13-253 O-RING 4.00 4.00 0.00 0.00 9.64 IC 2012-05-14
Cancelled 8ABB-15-010A PUMP,WATER 0.00 0.00 0.00 0.00 0.00 IC 2012-05-14
Open B6BF-15-010F PUMP,WATER (NO GASKET) 1.00 1.00 0.00 0.00 80.23 IC 2012-05-14 8ABB-15-010A
Open B6BF-15-116 GASKET,WATER PUMP 1.00 1.00 0.00 0.00 5.47 IC 2012-05-14 8ABB-15-010A
Open B366-15-165 GASKET,PUMP INLET 1.00 1.00 0.00 0.00 3.40 IC 2012-05-14 8ABB-15-010A
Open 0000-02-9402 @ BUSHING, SHIFTER (1/2") 1.00 1.00 0.00 0.00 9.35 IC 2012-05-14
Open NA01-51-721A ORNAMENT,RR(RED LETTERS) 1.00 1.00 0.00 0.00 16.62 IC 2012-05-14
Open KA01-51-SD6 CAP, HINGE 1.00 1.00 0.00 0.00 2.32 IC 2012-05-14
Open NA01-51-SA5 ROD,RETRACTABLE 1.00 1.00 0.00 0.00 12.32 IC 2012-05-14
Open BS34-51-S25A BOLT 8.00 8.00 0.00 0.00 8.00 IC 2012-05-14

Now I still need VVTuner, silicone hoses, and a timing belt.

• Who sells a silicone "head-oil warmer-t-body" hose?
• I really want a 1994 upper hose and a 1999 lower rad hose. Will anyone break-up their kit for me like this?
• Who makes a PCV plug for my 1994 style header?

hustler

iTrader: (6)

New firmware makes the car idle significantly better with AC cycling. I'm not sure what Dimitris did, but its much better. He also helped me "geat real" on the enrichments settings.

This is totally stupid, I never realized the taper settings on the left side of the screen under MAPdot affected the TPSdot. haha

hustler

iTrader: (6)

Holy ---- VVTuner is ordered!!!!!!!!!!!!!

Nothing left to buy, just elbow grease.

Reverant

iTrader: (10)

Make sure you have an LC-1 programming cable (DB-9 to 2.5mm jack) handy, you need it to program the VVTuner.

hustler

iTrader: (6)

I haz one, thanks for the advice. I plan to run the standard DIY table on it considering its a stock engine and they already did the work on the dyno.

Reverant

iTrader: (10)

Make sure to change the trigger output to "Inverted" on the VVTuner.

hustler

iTrader: (6)

I was going to use this unless you have something better.

I'm eventually going to move all this crap to the first post so people can go there for a walk-through on VVT swapping. Thanks for the help.

shuiend

iTrader: (24)

Those are all MS3X settings for VVT. The VVT Tuners settings are much simpler. Besides changing the one setting Reverent said, I doubt you will need to change anything else.

Reverant

iTrader: (10)

Exactly.

hustler

iTrader: (6)

Has anyone ever bolted a 3.63 to a 5-speed car and seen a huge improvement in fuel economy?

flounder

No, so trade me for my 4.30 torsen.

thenuge26

iTrader: (2)

No, but I will be doing it as soon as I can find a old mx-6 rear end close enough to me.

There are a few in Washington, but the shipping for the whole rear end would cost me more than the cost of new gears.

I guess I should start a wtb thread.

hustler

iTrader: (6)

Okay.

18psi

iTrader: (76)

If economy is all you care about, I'm pretty sure it would help. Car would be mind numbingly slow tho

y8s

iTrader: (8)

3.9 didn't get me anything

hustler

iTrader: (6)

I'm going to a 6/3.63 and I suspect the 400rpm drop will help. If not at least I can ***** on the phone while I drive.

richyvrlimited

iTrader: (1)

Yes, to my dads car.

Made zero difference to economy, however cruising was a bit more pleasant with the lower revs.

I should add that my dads car has a coldside supercharger (M45), and still runs the stock ECU with eManage, so you may see gains with tuning. Seriously doubt those gains would be huge though.

hustler

iTrader: (6)

Swap party starts on October 6th, come by and space-dock with me.