When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'd probably sell my 2871R Absurdflow Vband hotside with intercooler and everything for $2500 plus shipping and paypal the week after Laguna Seca this year.
Ninja edit because I realized my first price was too cheap.
Can anyone (Vlad?) explain if I have to do something with a jumper inside the ms case to use an external MAP? The instructions on trackspeed's site say there is a jumper, and Andrew has posted as such on here, but I saw Marcello and Vlad messing with an ms3 trying to add an external MAP and not doing anything inside the case.
we were adding a baro sensor, not map sensor. for active barometric correction.
afaik you do have to flip a jumper for external map use, but andrew/dimitris can confirm.
I think I am going to double down on the FM/2860 stuff and get the .64 housing. I have the GT500 injectors and IIRC, with 610cc at 43.5 psi they should be good to 310-330 whp depending on how far I want to push them since I am NB2 with 60 psi fuel pressure. I don't think it is financially prudent to go farther with my street car...yet.
Here is the VD with same as first few runs at the strip vs after I added 2 psi boost and roughly 1 degree of timing. I need to get on the dyno and get the fuel closer to 12:1 and add a LOT of timing in boost.
I've tried to call ATP for months, literally months! Their phone always says they are closed, regardless of time of day. My fab guy has confirmed he has the same problem.
08-21-2017, 05:59 PM
0
