Nothing to see here, just project Sisyphus, move along
#621
I don't have any gutted cars in my garage, but I have got entirely too many spare Miata parts littering the place. 2 spare 5-speeds, a 3.9 torsen, 2 spare oil pans, a set of 11.75 brakes that need to go on the car, a spare set of 11.75 rotors for the the track pads, the old engine block, a warped BP4W head, two or three spare alternators, an old FM radiator, etc. I need to get rid of some of that crap. I did at least manage to sell the boat anchor 16 inch 2003 wheels that came on the Seven and put the old Team Dynamics on it instead.
What kind of Triumph?
--Ian
#624
Elite Member
Thread Starter
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,441
Total Cats: 1,899
Crazy orange TR6. I have a "build" thread on NorCalRoadsters I haven't updated in ...quite some time.
I wish we had a build thread section that catered to non-miatas. Stuff like Stein's weird Peugeot or SAAB or whatever, Vlads various impulse buys, my Triumph, Ian's Lowcost... I know other people have other projects as well.
#627
Elite Member
Thread Starter
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,441
Total Cats: 1,899
Exactly! I'd be tempted to start a thread about my 73 F250 as well, just to keep me motivated and keep track of things. I posted about it in the Front Desk section, let's see if it gains any traction.
#630
I did that once with a Ford 302 back when I was about 20. I didn't have correct hardware so I just through bolted with what I had lying around. I broke one of the bolts while tightening the head. Scared the bajesus out of me so I've tried to make sure I use the correct bolts ever since.
Crazy orange TR6. I have a "build" thread on NorCalRoadsters I haven't updated in ...quite some time.
I wish we had a build thread section that catered to non-miatas. Stuff like Stein's weird Peugeot or SAAB or whatever, Vlads various impulse buys, my Triumph, Ian's Lowcost... I know other people have other projects as well.
Crazy orange TR6. I have a "build" thread on NorCalRoadsters I haven't updated in ...quite some time.
I wish we had a build thread section that catered to non-miatas. Stuff like Stein's weird Peugeot or SAAB or whatever, Vlads various impulse buys, my Triumph, Ian's Lowcost... I know other people have other projects as well.
Cool TR6! A build thread on my Seven wouldn't be that interesting -- I bought it from the guy who built it, and I haven't done all that much to it myself. Mostly just fixing some of the more egregious mistakes in it, things like 50 psi fuel hose on a 60 psi fuel system held on with worm gear hose clamps pushed onto the non-barbed ends of stock fuel components. That and the suspension arms that differed in length by 3/4 between the left and right sides...
--Ian
#633
Elite Member
Thread Starter
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,441
Total Cats: 1,899
Son of BEECH! SHEET!
I actually paid money for a physical copy of the Mazda factory BP engine assembly manual, and now I can't find the damn thing. I bought it at the same time I bought the physical copy of the FSM for my 2000 and somehow it didn't make it into the binder. ****'s gone now. I hope someone has a PDF hosted somewhere, time to do some searching
I actually paid money for a physical copy of the Mazda factory BP engine assembly manual, and now I can't find the damn thing. I bought it at the same time I bought the physical copy of the FSM for my 2000 and somehow it didn't make it into the binder. ****'s gone now. I hope someone has a PDF hosted somewhere, time to do some searching
#634
Elite Member
Thread Starter
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,441
Total Cats: 1,899
Progress!
Rods and pistons out
Dem bores and such
The rod journals are PERFECT. Rod bearings look PERFECT. No scoring, no marks, no nothing. I may not even have the rod journals polished at this point. They all measure out within 0.0005 of each other, which is convenient because the tolerance on the calipers is +/- 0.0005 I've got a set of legit mics I'll employ at a later date, but that's close enough for now. I still need to come up with a set of tolerances for the rod bearings, but I'll keep looking.
It's stripped down to just the block and crank, and I'll pull the crank later this afternoon. I expect no issues from the crank bearings either. With any luck, none of this will be in my hands any longer by Monday afternoon.
I almost feel bad having torn this motor apart, its silly how clean it is inside. Almost.
Rods and pistons out
Dem bores and such
The rod journals are PERFECT. Rod bearings look PERFECT. No scoring, no marks, no nothing. I may not even have the rod journals polished at this point. They all measure out within 0.0005 of each other, which is convenient because the tolerance on the calipers is +/- 0.0005 I've got a set of legit mics I'll employ at a later date, but that's close enough for now. I still need to come up with a set of tolerances for the rod bearings, but I'll keep looking.
It's stripped down to just the block and crank, and I'll pull the crank later this afternoon. I expect no issues from the crank bearings either. With any luck, none of this will be in my hands any longer by Monday afternoon.
I almost feel bad having torn this motor apart, its silly how clean it is inside. Almost.
#637
Elite Member
Thread Starter
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,441
Total Cats: 1,899
Ok, maybe not as perfect
Images are hosted offsite. I've included direct links to each so you can click them for full resolution glory.
Empty holes!
https://i.imgur.com/2qgj9Cb.jpg
That's #1 block side (obviously)
https://i.imgur.com/urw3iDY.jpg
Also #1, but reverse angle. No galling but definitely scuffed.
https://i.imgur.com/z8lirem.jpg
Closeup of #3
https://i.imgur.com/pjivF1u.jpg
Here are the caps, #1 is a the top, #5 at the bottom. Orientation follows as they would have been installed in the block, looking down. They all have a bit of polishing, #3 is the almost the worst...
https://i.imgur.com/0Jg15du.jpg
Solid closeup of #3. That looks like FOD to me.
https://i.imgur.com/vm4kMcE.jpg
Closeup of #5. Right side of the image would be the front of the block. The strange ring shaped indentation is super bizarre. It almost looks like something got in there when they originally installed the bearing and cranked down the main. You can also see where there was a small amount of material embedded into the bearing.
https://i.imgur.com/vBTPu52.jpg
Thrust bearings look pretty damn good if I do say so myself. Top one is the rear facing.
Workbench is starting to accumulate stuff again, I need another box of ziploc bags.
I couldn't get good pics of the crank surface due to the lighting, but there was absolutely nothing alarming to be found. This makes me feel a bit better, but I might go with the micropolish now anyway, just to be sure.
Also of note, there were no copper washer gaskets around the oil squirter banjo bolts.
Images are hosted offsite. I've included direct links to each so you can click them for full resolution glory.
Empty holes!
https://i.imgur.com/2qgj9Cb.jpg
That's #1 block side (obviously)
https://i.imgur.com/urw3iDY.jpg
Also #1, but reverse angle. No galling but definitely scuffed.
https://i.imgur.com/z8lirem.jpg
Closeup of #3
https://i.imgur.com/pjivF1u.jpg
Here are the caps, #1 is a the top, #5 at the bottom. Orientation follows as they would have been installed in the block, looking down. They all have a bit of polishing, #3 is the almost the worst...
https://i.imgur.com/0Jg15du.jpg
Solid closeup of #3. That looks like FOD to me.
https://i.imgur.com/vm4kMcE.jpg
Closeup of #5. Right side of the image would be the front of the block. The strange ring shaped indentation is super bizarre. It almost looks like something got in there when they originally installed the bearing and cranked down the main. You can also see where there was a small amount of material embedded into the bearing.
https://i.imgur.com/vBTPu52.jpg
Thrust bearings look pretty damn good if I do say so myself. Top one is the rear facing.
Workbench is starting to accumulate stuff again, I need another box of ziploc bags.
I couldn't get good pics of the crank surface due to the lighting, but there was absolutely nothing alarming to be found. This makes me feel a bit better, but I might go with the micropolish now anyway, just to be sure.
Also of note, there were no copper washer gaskets around the oil squirter banjo bolts.
#639
Elite Member
Thread Starter
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,441
Total Cats: 1,899
Also, picked this up today:
Winning! It should be here before the block gets back from the machine shop. If I'm feeling ambitious I'll cut it out of the binding and scan it.