2 Attachment(s)
Minor updates..
I bought a daily! No more driving that red Celica. I get to putt around in a 2000 Mazda Protege. 119k, 5 speed - pretty good condition, some rust on the wheel well but that's not uncommon, it'll need a clutch soon too so I'll have to look into that. Pics: Attachment 235027 Attachment 235028 Hopefully I can start to tear into the new Miata this weekend to start on the timing belt. I got the parts almost a month ago. It's finally going to be above 30 degrees for the first time in weeks. |
24 Attachment(s)
Some updates. Things are moving along slowly. I did the timing belt I mentioned above and...
Well, it ran ok. Smokes like hell, smelled like coolant. Tons of top end tick. Probably a HG issue. Whatever, I don't really feel like digging into it, I was going to drive this in stock form while building the engine but I'll have to be patient. Popped the fenders and bumper off to reroute some wires, and clean up the engine bay. Found some rust but it should be fairly easy to fix. https://www.miataturbo.net/attachmen...ine=1430355584 https://www.miataturbo.net/attachmen...ine=1430355584 https://www.miataturbo.net/attachmen...ine=1430355584 Tore apart the head. It looks pretty good for ~130k miles. Made a box inside a box to keep everything organized. https://www.miataturbo.net/attachmen...ine=1430355584 https://www.miataturbo.net/attachmen...ine=1430355584 https://www.miataturbo.net/attachmen...ine=1430355584 Ghetto testing the valves with water. Basically filling the runners with water and seeing if it makes it past the valves. Almost every valve leaked, so I'll be getting a 3 angle valve job at the machine shop. https://www.miataturbo.net/attachmen...ine=1430355584 Annnnnnnd block is bare. I bent the main bearing support plate a bit removing the oil pan.. the oil pump was stuck more than I was expecting. It should be easy enough to fix, I didn't grab pictures of that though. https://www.miataturbo.net/attachmen...ine=1430355584 Here's how the main bearings looked. I guess I forgot to take a picture of one. Either way they're in pretty good shape and I expect to be able to use standard size bearings. Machine shop will tell me for sure. pictures of the crank side, I'll get some this weekend. https://www.miataturbo.net/attachmen...ine=1430355584 https://www.miataturbo.net/attachmen...ine=1430355584 https://www.miataturbo.net/attachmen...ine=1430355584 https://www.miataturbo.net/attachmen...ine=1430355584 Next up: Find proper machine shop, get pistons and fasteners, bring everything to the machine shop for cleanup/boring/valve job. Then build. |
1 Attachment(s)
I briefly went over the crank today with a digital caliper (haven't bought a micrometer yet). This thing can only measure to the thousandths place, but will put a "5" when it's in between thousandths. Almost all journals measured 1.965(5)".
#1 and 2 were dead on, but 3, 4 and 5 I'll have to check again with a mic as there may be some taper/ovality. Service manual says standard spec is 1.9661-1.9667. This is below that by a thousandth or so (or .0006 if you believe the (5) the caliper spits out). Next spec for oversized bearings is 1.9569-1.9570 which I'm pretty far away from. Obviously these are rough measurements since it's not measuring the ten thousandths place, but does anything look worrysome here? I should be able to use standard size bearings, yah? Just might be about a thousandths loose? Attachment 235026 |
Anyone? Anyone? Bueller?
What did your crank measure, and what bearings are you using? |
5 Attachment(s)
Ordered a 1"-2" micrometer to get solid crank measurements.
Spoke with the machine shop which I have some questions about but I'll throw that in my other thread. Sold the wheels from my old Celica - Enkei 92's 14x7 +/- 0 4x114.3. Made some cash from that. The guy and his buddy drove 2 hours up from Delaware in a Miata to pick them up - they're going on a Celica Supra. Attachment 235025 Part collection is starting... These came today thanks to mrryanbaker. BNIB Wiseco 8.5:1 CR 84mm pistons. https://www.miataturbo.net/attachmen...ine=1431558300 |
1 Attachment(s)
Parts..
https://www.miataturbo.net/attachmen...ine=1432951344 Next up: order bearings. ACLs have been out of stock and after reading this thread it looks like KINGs may be a good option. Then I need to get my ass to the machine shop. |
Bolt the crank on with clean dry bearings and plasti gauge. It's the best way to check oil clearances. If your mic measurements come out similar to your caliper measurements, you're fine.
|
8 Attachment(s)
Originally Posted by curly
(Post 1236102)
Bolt the crank on with clean dry bearings and plasti gauge. It's the best way to check oil clearances. If your mic measurements come out similar to your caliper measurements, you're fine.
Measurements: #5 (closest to trans) ended up being a bit bigger than all the other journals. Does that say anything about how the motor was running? https://www.miataturbo.net/attachmen...ine=1433627532 Either way the engine build is on halt for a few weeks because I hopped on the group buy for the Trackspeed EFR kit (Awesome!). So I'll be doing chassis/wiring (read: cheap things) in the meantime. Mostly cleaning and painting things. Got the harnesses out of the engine bay today and removed the interior. This will make wiring for the WBO2/MS/gauges a ton easier. I also need to get a new speedo cable, trim up the harnesses since I'm removing things, and clean the fuck out the dirty ass carpet. https://www.miataturbo.net/attachmen...ine=1433627532 https://www.miataturbo.net/attachmen...ine=1433627532 I also pulled the top up on this thing for the first time ever.. real happy with the condition of this. PO wasn't lying when he said it was recently replaced. https://www.miataturbo.net/attachmen...ine=1433627532 |
Wreck and Rebuild a.k.a. Onyxyth build 2.0
Any suggestions for cleaning/degreasing the engine bay? I have access to a power washer, any ideas on how to seal up the firewall holes?
Maybe that's overkill and some spray degreaser and a brush would be fine.. |
Subbed! (I was linked via reddit)
Do you plan to get tuned by Ken Hill @ Oracle tuning? I had him tune mine a few weeks ago and couldn't be happier with the results. I figured I'd mention it because you are right in his area. |
Wreck and Rebuild a.k.a. Onyxyth build 2.0
Oh sweet! cool you saw the post.
Definitely considering it. It's either him or the guys at r/t tuning which also have a really good reputation. That's down the line quite a bit though, I don't even have an MS for the new chassis yet. 96-97 ms2 from the wrecked chassis won't PnP and I want to step to ms3 anyway. |
Oh nice, I didn't realize that you were around somewhat local, I'm in Lancaster. I can definitely vouch for myself and a few friends that were tuned by Ken and he did top notch work. I'd recommend him hands down.
Also if you want some black carpet while you have it out I can dig that out of my parts car |
<p>
Originally Posted by Onyxyth
(Post 1238329)
Oh sweet! cool you saw the post. Definitely considering it. It's either him or the guys at r/t tuning which also have a really good reputation. That's down the line quite a bit though, I don't even have an MS for the new chassis yet. 96-97 ms2 from the wrecked chassis won't PnP and I want to step to ms3 anyway.
|
Hey dude, I found your build thread after meeting you on reddit! The build looks awesome so far, it has really inspired me to start fresh on a new shell as soon as I can. I'll be sure to start a build thread for my car, albeit a bit less involved than this one.
|
24 Attachment(s)
Updates!
This arrived. EFR 6258. It's glorious, and much bigger physically than I was expecting. This is from the Trackspeed group buy so I'll have a manifold as well when they get finalized. https://www.miataturbo.net/attachmen...ine=1436396147 https://www.miataturbo.net/attachmen...ine=1436396147 https://www.miataturbo.net/attachmen...ine=1436396147 More engine bay cleaning. I used Turtle Wax's "Bug and Tar Remover" - it worked really, really well. It sprays on thick and seeps into all the little crevices. Scrub as needed and rinse off. https://www.miataturbo.net/attachmen...ine=1436396147 Results: https://www.miataturbo.net/attachmen...ine=1436396147 Next thing on the list was refurbishing the front subframe and suspension. I started by dropping it totally out of the car. I chocked the wheels and used an engine hoist to lift the car up by the bumper, and drug the whole shabang out from under. This was moderately sketchy but I figured the engine and interior are out, the subframe isn't going to be lifted, and the hoist is rated for 1 ton. At the very least I'm ~500 lbs under that. https://www.miataturbo.net/attachmen...ine=1436396147 In hindsight there was probably a few things I should have loosened while it was still attached to the car, particularly the ball joints. It's hard to get a solid hit to pop them when the whole assembly just slides across the floor when smacked. Oh well - I got everything apart: https://www.miataturbo.net/attachmen...ine=1436396147 To remove the bushings I used a long bolt, a shitload of washers, two metric adjustable wrenches, and some white lithium grease. This method worked pretty damn well. Just make sure you're not crushing the control arm with the vice - and probably most importantly, it needs to be sitting perfectly level in the vice otherwise it'll just bind up. https://www.miataturbo.net/attachmen...ine=1436396147 Next was getting all the parts prepped for paint. This took forever. Probably 15-20 hrs of wire wheeling across 4 days. The lower control arms are a bitch. The dugout part where the shock bolts to is pretty difficult to get cleaned up. No pictures of that, but here's a quick one of the subframe itself. It was humid that day too, so as I cleaned up one side, the other side was starting to rust almost immediately. https://www.miataturbo.net/attachmen...ine=1436396147 I primed these two parts with Rustoleum "Bare Metal" Primer. I ended up doing the rest with Krylon's Red Oxide primer as I felt it sprayed better, and might give me some protection for spots I missed / couldn't clean as well as I wanted (lower control arms..) https://www.miataturbo.net/attachmen...ine=1436396147 Painting. Shiny. https://www.miataturbo.net/attachmen...ine=1436396147 https://www.miataturbo.net/attachmen...ine=1436396147 That's where we're at now. I'll be ordering a boatload of things to get this all back together fairly soon. Bushings, ball joints, tie rods, rotors, dust caps, etc etc etc Next project will be de-powering the rack. |
nice work :) subbed
I'm glad I got my suspension powder coated now sanding/cleaning up is one of the most tedious jobs, you must have lots of patience. Bet that turbo is going to be awesome too |
Wreck and Rebuild a.k.a. Onyxyth build 2.0
1 Attachment(s)
|
Wreck and Rebuild a.k.a. Onyxyth build 2.0
Originally Posted by jimmyneutron
(Post 1247885)
nice work :) subbed
I'm glad I got my suspension powder coated now sanding/cleaning up is one of the most tedious jobs, you must have lots of patience. Bet that turbo is going to be awesome too |
4 Attachment(s)
I finished the bushing install and the subframe is mostly back together. I just need to decide on paint for the calipers (probably silver or black) and then get the hubs and everything together.
Love how fresh everything looks. By the way, the included poly lube is a fucking pain in the ass. It's so sticky and it's a bitch to get off your hands/gloves/rags. https://www.miataturbo.net/attachmen...ine=1437342256 https://www.miataturbo.net/attachmen...ine=1437342256 So I installed zerk fittings as seen above, but the upper arm bushings don't have the "channels" like the lower arm bushings do. I rigged this up and cut some small channels to grease the outside flange of the bushing (which I think is the "working" edge of the bushing on all of these?) https://www.miataturbo.net/attachmen...ine=1437342256 https://www.miataturbo.net/attachmen...ine=1437342256 That's where I'm at now. I'll likely be in a holding pattern for a few weeks while some other things get straightened out. |
Wreck and Rebuild a.k.a. Onyxyth build 2.0
5 Attachment(s)
De-powered the rack today, didn't weld the pinion though, It seemed like there wasn't a strong argument for doing it.
Welded the fittings closed to plug the lines, also found some pipe threaded plugs for the larger lines. Edit: you can't rearrange the order of pictures on mobile? |
All times are GMT -4. The time now is 06:42 AM. |
© 2024 MH Sub I, LLC dba Internet Brands