DIY Turbo Discussion greddy on a 1.8? homebrew kit?
Sponsored by:
Sponsored by:

[HELP]I need help boosting my miata

 
Old 12-09-2018, 09:59 PM
  #1  
Newb
Thread Starter
 
Join Date: Dec 2018
Posts: 2
Total Cats: -1
Default [HELP]I need help boosting my miata

Hello guys i have a 1991 miata and i want to boost it..so i want to turbo my miata and i am trying to figure out what setup i will run on..

This is what i chose at the moment

1)CXRacing intercooler Piping Kit For 90-98 Mazda Miata.

2)CXRacing Turbo kit For 89-93 Mazda Miata.

I know a lot of people say that the CXRacing turbo kit sucks but the most common issue is the manifold and i will buy a cast iron one.

i donít want much boost at the moment this turbo is temporary i will keep it arround 6-10 months and later i will upgrade to MegaSquirt and a garret.

I also saw another one cheap turbo kit the MKTurbo but I donít seem to like it so much because i already have exhaust and it has a t3 turbo and i want a fast spool turbo for a 16L engine.

Tell me what other options i have and what i should change.Thanks!
Sorry if i made any mistakes i am not a mechanic and sorry for my bad English.
Giorgos Burned is offline  
Reply
Leave a poscat -1 Leave a negcat
Old 12-09-2018, 10:39 PM
  #2  
Tweaking Enginerd
iTrader: (2)
 
Join Date: Mar 2013
Location: Boulder, CO
Posts: 983
Total Cats: 119
Default

MKTurbo and MS3, everything else on the budget side of things is a waste of money.

you are about 1 post from being torched. Do yourself a favor and read the stuff on this forum before posting again.

edit: there, I did my good deed for the day
Ted75zcar is offline  
Old 12-09-2018, 10:51 PM
  #3  
Junior Member
 
Join Date: Apr 2016
Location: Houston, TX
Posts: 256
Total Cats: 21
Default

If you have exhaust, go for a Kraken kit and order manifold+dp. Sell your turbo and buy a 2554r or 2560r. You'll spend about the same if not more when you buy a cast iron manifold separately.
skylinecalvin is offline  
Old 12-10-2018, 12:34 AM
  #4  
Senior Member
 
Join Date: Mar 2014
Location: Jacksonville, FL
Posts: 1,191
Total Cats: 144
Default

How exactly are you planning to use a cxracing turbo kit with a cast manifold? The downpipe wont work with the cast manifold.

Why do people always say, "I'll get garbage now, but in 6 months I'll get the good stuff" ??

you like throwing money out the window?

If you want fast spool, solid and affordable, get a kraken manifold and downpipe set and a real 2560 or 2554 turbo.

t25 and t28 turbos can be had for fairly cheap from the 240sx guys.

also megasquirt and injectors is not optional, unless you like blowing up motors.

any way you slice it, it takes minimum $3k to turbo a miata. Not including the 1.8 diff that you need and new clutch.
borka is offline  
Old 12-10-2018, 06:13 AM
  #5  
Moderator
iTrader: (12)
 
sixshooter's Avatar
 
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 18,875
Total Cats: 2,355
Default

Megasquirt and wideband first, then injectors, then clutch, THEN turbo. This is the way.
sixshooter is online now  
Old 12-10-2018, 06:27 AM
  #6  
Newb
Thread Starter
 
Join Date: Dec 2018
Posts: 2
Total Cats: -1
Default

Thatís why i did this post guys..

I didnít think about kraken +downpipe and it seems good deal but i live in cyprus and its a little bit hard to find a garrett and find it cheap and i also have problems with shipping because not all products ships to Europe from USA

Where is the best place to buy MegaSquirt?

So i keep the CXRacing intercooler and piping?i donít want to buy a universal kit because i am not good at freestyle and i also have AC and Powersteering

Yes i know the right way sixshooter by i am tryna choose the expensive parts MegaSquirt is standard and i donít have any other options with my budget than MegaSquirt
Giorgos Burned is offline  
Old 12-10-2018, 08:35 AM
  #7  
Senior Member
 
Join Date: Mar 2014
Location: Jacksonville, FL
Posts: 1,191
Total Cats: 144
Default

Kraken is in europe.
https://kraken-mx5.eu

mslabs is in Greece - get ms3 basic
https://mslabs.gr

cxracing intercooler kit is fine. But dont expect 100% bolt on, some fiddling required.

injectors I recommend flow force ev14 640cc.
https://goflowforce.com
borka is offline  
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
loak1er
Meet and Greet
15
05-29-2018 11:33 PM
x_25
Build Threads
103
06-09-2017 06:20 PM
Last man standing
General Miata Chat
45
09-30-2016 12:58 AM
AdoboMiata
DIY Turbo Discussion
127
06-10-2012 07:20 PM
joeldc13
DIY Turbo Discussion
1
06-05-2011 01:00 PM


Thread Tools
Search this Thread
Quick Reply: [HELP]I need help boosting my miata


Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.