1.6 Miata Exhaust Fabricators? Charlotte area?
05-20-2022, 11:39 AM
#1
Newb
Thread Starter
Join Date: Apr 2022
Location: South Carolina (near CLT)
Posts: 3
Total Cats: 0
1.6 Miata Exhaust Fabricators? Charlotte area?
Hi,
I've been trying to find information about where to get an exhaust for a Turboed 91' 1.6... and I'm kind of coming up dry. I've seen alot about Enthuza, but also saw that he wasn't making exhausts anymore? So, I'm here to see if you guys have any suggestions. I live in SC near Charlotte, NC, in case there are any local fabricators around. I'm wanting an exhaust that's high flow of course, and I'm okay with it being 2.5" but 3" would be preferred. I'd kind of prefer it to be catless as well. I honestly just need an exhaust to put on so that I can drive it. xD It doesn't even have a downpipe currently, so I can't really do much with it, because everything flows right into the engine bay at the moment. I don't know if it would just be cheaper and easier to just call around to custom exhaust shops to just see if they can weld something together for me... because I was surprised to see there isn't as many exhaust options as I thought there were for turboed miatas... and I'm not too concerned about what it sounds like, as it's a going to be a track car. I just need it to be functional at the moment. Any suggestions would be appreciated!
Thanks in advance!
I've been trying to find information about where to get an exhaust for a Turboed 91' 1.6... and I'm kind of coming up dry. I've seen alot about Enthuza, but also saw that he wasn't making exhausts anymore? So, I'm here to see if you guys have any suggestions. I live in SC near Charlotte, NC, in case there are any local fabricators around. I'm wanting an exhaust that's high flow of course, and I'm okay with it being 2.5" but 3" would be preferred. I'd kind of prefer it to be catless as well. I honestly just need an exhaust to put on so that I can drive it. xD It doesn't even have a downpipe currently, so I can't really do much with it, because everything flows right into the engine bay at the moment. I don't know if it would just be cheaper and easier to just call around to custom exhaust shops to just see if they can weld something together for me... because I was surprised to see there isn't as many exhaust options as I thought there were for turboed miatas... and I'm not too concerned about what it sounds like, as it's a going to be a track car. I just need it to be functional at the moment. Any suggestions would be appreciated!
Thanks in advance!
Reply
0
0
05-20-2022, 12:29 PM
#2
mkturbo.com
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,177
Total Cats: 1,681
You haven't mentioned what manifold or turbo. That matters a ton.
I was up in Charlotte yesterday. Could have dropped off an exhaust then, no idea if I will be back that way any time soon.
I was up in Charlotte yesterday. Could have dropped off an exhaust then, no idea if I will be back that way any time soon.
Reply
0
0
06-21-2022, 10:48 AM
#3
Newb
Join Date: Jun 2022
Posts: 6
Total Cats: 0
oh you sell exhausts? i am looking at exhaust options for my 1.6, I am running a cast ebay manifold and a the .63 t3/t4 china charger.
originally i was just gonna get the 2.5 isr circuit spec exhaust and buy a welder and make my own downpipe but all my friends are saying i will fail miserably and to just have the local performance exhaust shop do it. but if im handing it off to a exhaust shop i feel like i should just get a custom exhaust at that point.
originally i was just gonna get the 2.5 isr circuit spec exhaust and buy a welder and make my own downpipe but all my friends are saying i will fail miserably and to just have the local performance exhaust shop do it. but if im handing it off to a exhaust shop i feel like i should just get a custom exhaust at that point.
Reply
0
0
06-21-2022, 12:29 PM
#4
mkturbo.com
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,177
Total Cats: 1,681
oh you sell exhausts? i am looking at exhaust options for my 1.6, I am running a cast ebay manifold and a the .63 t3/t4 china charger.
originally i was just gonna get the 2.5 isr circuit spec exhaust and buy a welder and make my own downpipe but all my friends are saying i will fail miserably and to just have the local performance exhaust shop do it. but if im handing it off to a exhaust shop i feel like i should just get a custom exhaust at that point.
originally i was just gonna get the 2.5 isr circuit spec exhaust and buy a welder and make my own downpipe but all my friends are saying i will fail miserably and to just have the local performance exhaust shop do it. but if im handing it off to a exhaust shop i feel like i should just get a custom exhaust at that point.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
