1.6L HKS Manifold Question
#1
1.6L HKS Manifold Question
For those of you who actually have one...
In your opinion, is there enough clearance to run these two parts off the turbine:
V-band adaptor from ATP with 3" 90 degree low-profile downpipe.
Thanks.
In your opinion, is there enough clearance to run these two parts off the turbine:
V-band adaptor from ATP with 3" 90 degree low-profile downpipe.
Thanks.
#3
According to the pic in this thread (which, oddly, is the only pic I've been able to find of the 1.6L HKS) it's the middle. Which is probably bad.
EDIT: Actually, unless it's an illusion, it appears to be slightly offset to the front, but if so, it's not by much.
EDIT: Actually, unless it's an illusion, it appears to be slightly offset to the front, but if so, it's not by much.
#4
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,501
Total Cats: 4,080
probably be close with the flex, without it, I'd think it would fit no problems....if anything you can just trim the shelf out a bit and really take care of the heater hoses and brake master.
#6
Junior Member
iTrader: (1)
Join Date: Oct 2004
Location: Haarlem ,the Netherlands
Posts: 453
Total Cats: 0
il motorsport in germany makes a t25 downpipe for the hks miata mani...
http://www.ilmotorsport.de/shop/arti...627152f7c1c514
email me for pics of the hks turbo set....(i have a lot of pics)
http://www.ilmotorsport.de/shop/arti...627152f7c1c514
email me for pics of the hks turbo set....(i have a lot of pics)
#7
I tried to e-mail you but it said you didn't want to receive e-mails. Mine is jwarriner@gmail.com and I'd love to see any pics you have time to send me.
Thread
Thread Starter
Forum
Replies
Last Post