Originally Posted by Braineack
(Post 991732)
You stupid little twat. You wouldn't know a good thing if you dumped thousands of dollars on it and still was left with something only sub-par in comparison!
What makes you say I cheaped out on my build? I've done everything but build/replace the motor. -1 Anyways, sorry if offended you by calling you a cheap Jew. |
lol. I didn't know any better back then, i did have an impassioned admin that wanted to save me from my own misery.
|
:laugh: I actually knew from the get-go that he meant no offense, but it was so much fun watching you get butthurt about it anyways
|
i did too, bro, i did too.
|
Originally Posted by Braineack
(Post 991860)
lol. I didn't know any better back then, i did have an impassioned admin that wanted to save me from my own misery.
|
like when he deleted all posts from pre-2006 or something like that?
|
Originally Posted by BTMiata
(Post 991839)
Is a 1.8 swap the cure for aids? I think you might be onto something here Brain
Scientists Report First Cure Of HIV In A Child, Say It's A Game-Changer : Shots - Health News : NPR |
I believe the child was functionally cured from HIV, however, there could still be minute amounts of the virus that went undetected. Until further research, the child isn't 100% completely cured but, it does give mankind some hope.
As for MT.net, the only cure for AIDS is a 1.8 turbo. |
Brain, are you still running the T3 super 60 and BEGI cast manifold? On a 93 1.6?
Jim |
no a 50 trim chinacharger t3 on the same manifold. I'm making 240/240 at around 14psi
|
This thread is stupid and so are all of you! I'm never coming back to this thread again, ever!
http://24.media.tumblr.com/tumblr_m6...yd7qo1_500.png |
Ok, I have to ask....you complain bitterly about how crappy the 1.6 is but you've run a fairly large 300hp capable turbo that spools poorly on a 1.6 now you're running a slightly smaller churbo which is also a poor choice for spool. Why not run a turbonetics T3 40 or 45 trim if you want to stick with your manifold? either of those would spool significantly better than what your running and should make the same power your running.
You're blaming your motor for not performing to your expectations but you're hampering it with a poor choice in turbo. Jim |
Originally Posted by jimj64
(Post 992072)
Ok, I have to ask....you complain bitterly about how crappy the 1.6 is but you've run a fairly large 300hp capable turbo that spools poorly on a 1.6 now you're running a slightly smaller churbo which is also a poor choice for spool. Why not run a turbonetics T3 40 or 45 trim if you want to stick with your manifold? either of those would spool significantly better than what your running and should make the same power your running.
You're blaming your motor for not performing to your expectations but you're hampering it with a poor choice in turbo. Jim |
Ban hammer strikes again lololol
I was gonna warn him too, but he's a really stubborn old man, and probably wouldn't have listened. |
especially after I would have told him my 1.6L performs VERY well for a 1.6L and outspools most others on this site with much smaller turbos, even BB turbos...
|
C'mon Brain, after 2 pages of talking about how cheap you are, why don't you just buy a $700 turbo? Surely that will solve all your problems.
Better yet why not just get an EFR? Sure it's more than twice the cost of a 1.8L upgrade, but who care about logic? |
why a EFR, they are comparable to a GT2871.
|
Same person that would enjoy a m45+1.6
|
I do need to buy an auto intake cam one of these days.
|
Took long enough. Don't think anyone else on the board is more annoying and less helpful
|
All times are GMT -4. The time now is 07:44 AM. |
© 2024 MH Sub I, LLC dba Internet Brands