EGR take off point question
#1
Senior Member
Thread Starter
Join Date: Apr 2011
Location: Martin, Slovakia
Posts: 507
Total Cats: 74
EGR take off point question
Sorry if this has been answered before... I searched and couldn't find the answer I have a 99ae that I am putting a bits and pieces turbo set up on.
Can the egr take off point be from the turbo down-pipe or does it have to come from the turbo manifold?
I guess there is more heat and higher pressure at the manifold which makes it the best place to tap in but the manifold I am using is an ebay s4 type and I am reluctant to weld a tapping point in it as it looks fragile.
An easier alternative is to tap into the down-pipe. Would this be OK? Is there a danger of reverse flow or some other things I'm missing?
thx, William
Can the egr take off point be from the turbo down-pipe or does it have to come from the turbo manifold?
I guess there is more heat and higher pressure at the manifold which makes it the best place to tap in but the manifold I am using is an ebay s4 type and I am reluctant to weld a tapping point in it as it looks fragile.
An easier alternative is to tap into the down-pipe. Would this be OK? Is there a danger of reverse flow or some other things I'm missing?
thx, William
Thread
Thread Starter
Forum
Replies
Last Post