5858 vs 6262 vBand low a/r
#1
5858 vs 6262 vBand low a/r
I am in the process of building a high revving high horsepower Miata. I currently have a full turbo set up that is doing 220 at the wheels but that's not enough. I have a fully built bottom end and top end -cams at this point. I have oversized valves and heavy springs to go with my high revs as well as a balanced crankshaft. My question to all of you is if I want to have in the 500 hp at around 8000rpm will it be better to go for the 5858 or the larger 6262.
I'm leaning towards the 5858 due to the fact that it will spool that much sooner and it is rated for over 600 hp.
there is the green drag Miata on Instagram "sexytime" last time i asked him he was running a 6262 on a 1.6.
I have a 96 NA8 sooooo. little more there. he also had more fab work than I do though.
I'm leaning towards the 5858 due to the fact that it will spool that much sooner and it is rated for over 600 hp.
there is the green drag Miata on Instagram "sexytime" last time i asked him he was running a 6262 on a 1.6.
I have a 96 NA8 sooooo. little more there. he also had more fab work than I do though.
#4
Moderator
iTrader: (12)
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 20,664
Total Cats: 3,013
I would delete Mr Sexytime from your Instagram feed since he's been in trouble with the law for pedophilia.
Beyond that, his car is a show car and not optimized to go fast. I seem to recall his turbo not spooling until around 6,000 RPM or something.
Why don't you spend a little time reading some of the threads around here? There are people running mid 10 second quarter miles at 128 miles an hour with 6 inch wide rear wheels, 8 inch tires, and no fender pull.
Beyond that, his car is a show car and not optimized to go fast. I seem to recall his turbo not spooling until around 6,000 RPM or something.
Why don't you spend a little time reading some of the threads around here? There are people running mid 10 second quarter miles at 128 miles an hour with 6 inch wide rear wheels, 8 inch tires, and no fender pull.
#7
I would delete Mr Sexytime from your Instagram feed since he's been in trouble with the law for pedophilia.
Beyond that, his car is a show car and not optimized to go fast. I seem to recall his turbo not spooling until around 6,000 RPM or something.
Why don't you spend a little time reading some of the threads around here? There are people running mid 10 second quarter miles at 128 miles an hour with 6 inch wide rear wheels, 8 inch tires, and no fender pull.
Beyond that, his car is a show car and not optimized to go fast. I seem to recall his turbo not spooling until around 6,000 RPM or something.
Why don't you spend a little time reading some of the threads around here? There are people running mid 10 second quarter miles at 128 miles an hour with 6 inch wide rear wheels, 8 inch tires, and no fender pull.
Do you know where I can find those threads? Thanks for you reply
#8
Read all of these
https://www.miataturbo.net/useful-saved-posts-8/
Read This
https://www.miataturbo.net/diy-turbo...big-post-4288/
Read a lot of these
https://www.miataturbo.net/build-threads-57/
https://www.miataturbo.net/useful-saved-posts-8/
Read This
https://www.miataturbo.net/diy-turbo...big-post-4288/
Read a lot of these
https://www.miataturbo.net/build-threads-57/
#10
Read all of these
https://www.miataturbo.net/useful-saved-posts-8/
Read This
https://www.miataturbo.net/diy-turbo...big-post-4288/
Read a lot of these
https://www.miataturbo.net/build-threads-57/
https://www.miataturbo.net/useful-saved-posts-8/
Read This
https://www.miataturbo.net/diy-turbo...big-post-4288/
Read a lot of these
https://www.miataturbo.net/build-threads-57/
Wow thanks for the fast response. I'll definitely have a look at those
#11
You need to read a lot. And once you have read a lot and think you know enough read more. There is some of the best knowledge around on this forum but every day some new person asks obvious questions that have been answered in a million threads. Just search and read a lot and almost every one of your questions will be answered.
#14
Moderator
iTrader: (12)
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 20,664
Total Cats: 3,013
This guy runs 10's with a 2871:
https://www.miataturbo.net/build-thr...auto-nb-88990/
If you want to read something fun by someone doing things contrary to the norm:
https://www.miataturbo.net/build-thr...t-build-87547/
https://www.miataturbo.net/build-thr...auto-nb-88990/
If you want to read something fun by someone doing things contrary to the norm:
https://www.miataturbo.net/build-thr...t-build-87547/
#15
I would delete Mr Sexytime from your Instagram feed since he's been in trouble with the law for pedophilia.
Beyond that, his car is a show car and not optimized to go fast. I seem to recall his turbo not spooling until around 6,000 RPM or something.
Why don't you spend a little time reading some of the threads around here? There are people running mid 10 second quarter miles at 128 miles an hour with 6 inch wide rear wheels, 8 inch tires, and no fender pull.
Beyond that, his car is a show car and not optimized to go fast. I seem to recall his turbo not spooling until around 6,000 RPM or something.
Why don't you spend a little time reading some of the threads around here? There are people running mid 10 second quarter miles at 128 miles an hour with 6 inch wide rear wheels, 8 inch tires, and no fender pull.
#19
Moderator
iTrader: (12)
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 20,664
Total Cats: 3,013
Was this the guy that had slower ET's in the quarter mile with 500 horsepower versus the guy with 350 horsepower?
And his exhaust exits out of his hood and he's got great big flares and wheels off of a Buick donk? And slower than a guy who's on factory wheels in the quarter? Slower than the guy who's running a full exhaust and no cut up sheet metal?
Yeah, I would certainly follow the choices of Mr. Sexytime. He seems to be replete with good ideas.
And his exhaust exits out of his hood and he's got great big flares and wheels off of a Buick donk? And slower than a guy who's on factory wheels in the quarter? Slower than the guy who's running a full exhaust and no cut up sheet metal?
Yeah, I would certainly follow the choices of Mr. Sexytime. He seems to be replete with good ideas.
#20
Elite Member
iTrader: (8)
Join Date: Dec 2008
Location: Kingston, Ontario
Posts: 2,910
Total Cats: 51
I built a manifold for a local guy with a precision 5558 turbo on a late non-vvti 1.8 (99-00). he makes full boost at 4300rpm and also makes 490whp. no need for a 6262 with those numbers, imho.
Here is his roadkill feature.
FUEL: Seeking St-Hubert BBQ Chicken In A 500-Horsepower Mazda-Powered Mazda Miata - Roadkill
Here is his roadkill feature.
FUEL: Seeking St-Hubert BBQ Chicken In A 500-Horsepower Mazda-Powered Mazda Miata - Roadkill