Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)
-   DIY Turbo Discussion (https://www.miataturbo.net/diy-turbo-discussion-14/)
-   -   Alejo_NIN's Version of Coolant Reroute (https://www.miataturbo.net/diy-turbo-discussion-14/alejo_nins-version-coolant-reroute-79755/)

Alejo_NIN 06-27-2014 10:58 PM

Alejo_NIN's Version of Coolant Reroute
 
10 Attachment(s)
Well, after seeing hundredsupon hundreds of reroute, i came up with my own version.
sinc ei am very cheap, mine does not requiere the SPACER.

here you can notice what i did.
i opened up the hole where the temp sending sensor for the dash temperature gauge. this must be tapped to M12 1.5
then, a little higher, i drilled another hole for a NTP 27 Tap, where i relocated the temp sensor to.
since i don't have heater core, i didn't need the hoses, i got the kia neck whcih you sitll need. the thermostat fits perfectly still.
i cut down the bolt on the top right awhile removing the protruding metal elbow which feeds water to the oil cooler.
i then inserted a piece of copper pipe, in specific a cap and forced threated a pipe cap.
then i drilled a hole on the side for a barbed NTP 27 fitting to replace the one i just capped off.

Before:
https://www.miataturbo.net/attachmen...ine=1403924301

After:
https://www.miataturbo.net/attachmen...ine=1403924301

pipe that feeds the oil cooler
https://www.miataturbo.net/attachmen...ine=1403924301

kia neck and why i shaved off those other pipes
https://www.miataturbo.net/attachmen...ine=1403924301

how the sensors sit now
https://www.miataturbo.net/attachmen...ine=1403924301

i had to shim the sensor a bit to have it sit flush with the head. the connector just slides in with no problem.
i used teflon tape and also used RTV just to make sure.
the sensors sit just before the thermostat so you'll get the best temp reading possible.
https://www.miataturbo.net/attachmen...ine=1403924301

well, i hope someone can benefit from this.
you still need the escape or explorer hose(i don't remember)

18psi 06-28-2014 12:55 AM

Its not your own lol.

This has been done numerous times now. Since like 2007 lol

https://www.miataturbo.net/engine-pe...e-ideas-63883/
https://www.miataturbo.net/general-m...reroute-12027/

It works though, so good for you.

curly 06-28-2014 01:12 AM

Ha, you even did it right! Nice work.

He joined in '07, so it's fitting.

Alejo_NIN 06-28-2014 06:59 AM

Ha sorry. I never saw that one. That's on a 1.6 tho..im on a 1.8 so..still my reroute ;)
I used a Kia neck..still my reroute. Lol. But I see your point. Well..add my post to the pile of reroutes. In hopes someone would benefit.

Braineack 06-28-2014 10:36 AM

at least you didn't go hyper on us.


but nothing new.

Alejo_NIN 06-28-2014 11:09 AM


Originally Posted by Braineack (Post 1144215)
at least you didn't go hyper on us.


but nothing new.

haha

nothing to see here...lol

18psi 06-28-2014 01:43 PM

Since you took proper pics and documented it, definitely not a bad thing so congrats on that.

Just always remember: "there is nothing new under the sun"

:party:

Alejo_NIN 06-28-2014 09:49 PM


Originally Posted by 18psi (Post 1144256)
Since you took proper pics and documented it, definitely not a bad thing so congrats on that.

Just always remember: "there is nothing new under the sun"

:party:

i figured the pics would help more than 1000 word write up..


All times are GMT -4. The time now is 07:26 PM.


© 2024 MH Sub I, LLC dba Internet Brands