Alright, I have to route a boost/vacuum line through the firewall
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Mar 2006
Location: Tucson "it's 110º" Arizona
Posts: 1,017
Total Cats: 0
Alright, I have to route a boost/vacuum line through the firewall
Any recommendations on the easiest location?
I will be splitting it to source the o2 clamp and the boost gauge, so either side of the bay ok. I have that good feeling either side will be lots of fun..
Thanks
I will be splitting it to source the o2 clamp and the boost gauge, so either side of the bay ok. I have that good feeling either side will be lots of fun..
Thanks
#2
There's a good hole behind the booster can at the master cylinder on the exhaust side- comes out around the pedals. And there's another hole down by the fuse box chassis on the intake side that comes through above the ecu, in the corner. I used an old OE antenna mast for running wires. It did an excellent job of spearing through the rubber insulation matt. - rob
#3
Senior Member
Thread Starter
iTrader: (1)
Join Date: Mar 2006
Location: Tucson "it's 110º" Arizona
Posts: 1,017
Total Cats: 0
There's a good hole behind the booster can at the master cylinder on the exhaust side- comes out around the pedals. And there's another hole down by the fuse box chassis on the intake side that comes through above the ecu, in the corner. I used an old OE antenna mast for running wires. It did an excellent job of spearing through the rubber insulation matt. - rob
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM