Another Injector question - Siemens Deka
I've been reading through a lot of builds...and haven't found anyone using 60 lb/hr Seimens Deka IV Mototron injectors...is there a reason why they would be undesirable? (...other than the connector being different...)
Thanks! |
We like PNP and what is known.
|
Originally Posted by zoomzoom365
(Post 796450)
I've been reading through a lot of builds...and haven't found anyone using 60 lb/hr Seimens Deka IV Mototron injectors...is there a reason why they would be undesirable? (...other than the connector being different...)
Thanks! http://www.bmotorsports.com/shop/pro...roducts_id/448 [and I believe is is Siemens] and it looks like you can get them as either EV-1 or EV-6 |
Price certainly is an interesting portion of their attractiveness...when compared to buying a set of junk-yard RX7 injectors, then having them cleaned...the pricing is getting comparable...plus they are new...and may have a better spray pattern (yes...I said may)
I've used a set in the past on another project (Saab 2.0l Ecotec turbo), with good results, but I didn't have any other comparison injectors on that car... |
Originally Posted by zoomzoom365
(Post 796966)
Price certainly is an interesting portion of their attractiveness...when compared to buying a set of junk-yard RX7 injectors, then having them cleaned...the pricing is getting comparable...plus they are new...and may have a better spray pattern (yes...I said may)
I've used a set in the past on another project (Saab 2.0l Ecotec turbo), with good results, but I didn't have any other comparison injectors on that car... |
My only worry is being able to idle the injectors well on a 1.6...
|
Originally Posted by mx594m
(Post 796962)
what is the COMPELLING reason for using them? the $50/ea price?
http://www.bmotorsports.com/shop/pro...roducts_id/448 [and I believe is is Siemens] and it looks like you can get them as either EV-1 or EV-6 |
I believe he was just referring to the connector compatibility...
|
Originally Posted by zoomzoom365
(Post 807314)
I believe he was just referring to the connector compatibility...
|
The connector has nothing to do with connector. Its so obvious now.
|
I meant ev1\6 are not connectors, they are injector types from bosch.
The connector shown in the link is a minitimer connector The other deka injectors have a USCAR connector. |
well then educate us, what exactly do EV1 and EV6 mean?
"USCAR (EV6) & Minitimer (EV1) connectors available!" from the deka advertisement http://media.photobucket.com/image/e...1vsEV6.jpg?o=1 |
1 Attachment(s)
I did
Look an EV6 injector with a minitimer connector https://www.miataturbo.net/attachmen...ine=1324087041 The EV6 injector pic in your post has a USCAR connector. |
"USCAR (EV6) & Minitimer (EV1) connectors available!" from the deka advertisement
|
1 Attachment(s)
Originally Posted by mx594m
(Post 807331)
"USCAR (EV6) & Minitimer (EV1) connectors available!" from the deka advertisement
Look an EV6 injector with a USCAR connector on it. https://www.miataturbo.net/attachmen...ine=1324088621 Look an EV6 injector with a Minitimer connector on it. https://www.miataturbo.net/attachmen...ine=1324087041 |
So, if I understand your point... the marketplace generally refers to the connector based on the original connectors supplied these injector types...but that's not always the case...
For reference, what is the name of the connector on the Miata injectors? |
Originally Posted by zoomzoom365
(Post 807334)
EV6 uses a USCAR connector.
I would guess its liek that way because a lot of the EV1 injectors have minitimer connectors and everyone generally thinks they are refered as EV1 connectors. I've seen it on forums and in person. Just keeps going on like this because websites like that list that because either they know it as that or use it as search keywords for other people that know no better. |
okay, found this
"The EV1 is the earlier design type: it is a pintle injector, meaning it has tapered needle that atomizes and sprays the fuel into the engine. The EV6, on the other hand, is a disc-type or "director plate" style injector, which has four small holes to better atomize the fuel." Read more: Specifications for the Bosch Fuel Injector | eHow.com http://www.ehow.com/list_7450463_spe...#ixzz1gl41v9Hh |
now what are EV14s? how do they differ? do miatas use 48mm or 60mm length?
|
EV14's are the newest injector type from Bosch
composite materials make up the shell of them, they also have smaller internals compared to the EV6's and overall are a better buy compared to eariler bosch injectors for people going standalone. I'm still interested in the Siemens deka V twin spray 39lb\hr fuel injectors. |
All times are GMT -4. The time now is 10:48 AM. |
© 2024 MH Sub I, LLC dba Internet Brands