hello i cant figure out how i should configurate my boost controller i run 12psi with an intercooler and link ecu, but i hawe spoolup weary late, i hawe set the boostcontroller to 60% but i hawe noe idea how to set the other walues. hawe some of you got an idea?

 

I've found this writeup to be very helpful when I was running a Spec2.
http://forums.evolutionm.net/showthread.php?t=60826

Just take your time, and read it completely through a few times, then print it out, and take it into the car.

C

 

Edward, Are you from Deutschland?

 

Judging by the use of his W's, I would have to say yes. Welcome to the forum, love to hear from the European crowd! Tell us about your setup.

 

no in fackt i am from Norway, i hawe a 92 mx5 with the link ecu greddykit the downpipe from begi flyi'n miata exhaust and a sierra cossie ic...

http://www.mx5-miata.no/phpbb/viewto...er=asc&start=0

 

internal or external wastegate? 60% is pretty high are you spiking?

 

i sat it down so i dont run 60% anymore, i hawe ca 0.8bar of presure, but i dont think that the internal wg is good enough