BEGI Kit Pics
#42
Had to send the F/IC back to AEM to get looked at. Would run good if I held the harness just right. Otherwise, was experiencing signal dropout, rough running, cel, etc., whenever I moved the harness around. Runs fine with the bypass plug installed. The bypass plug pins look to be larger that those on the F/IC which I think may have caused the sockets in the harness connector to enlarge.
Didn't like the way the A-pillar pod blocked the view so went with a TDR gauge panel. Slotted the inner shift boot to route the O2 cable through.
Didn't like the way the A-pillar pod blocked the view so went with a TDR gauge panel. Slotted the inner shift boot to route the O2 cable through.
#46
Yep exact same thing. Guess they're making some major bank on those.
http://tinyurl.com/2mq5th
The trim panel that goes around it all hold it in well too.
http://tinyurl.com/2mq5th
The trim panel that goes around it all hold it in well too.
#56
Just to follow up on the F/IC problems I'm having. AEM looked at the unit and couldn't find anything wrong with it and sent it back along with a new harness. Wired the new harness in and still having the same problem with the engine running rough/dieing when the unit is moved around. Runs fine with the bypass harness installed. Sent AEM some vids to show them.
http://s16.photobucket.com/albums/b3...ssHarnness.flv
http://s16.photobucket.com/albums/b3...CInstalled.flv
http://s16.photobucket.com/albums/b3...ssHarnness.flv
http://s16.photobucket.com/albums/b3...CInstalled.flv
#58
did u cut of the spliced sections of the harness?? theres a possibility that they are contacting each other when moving. but its kinda hard to see in the video... im running the same set up as you (like scary identical) but on my 01. f/ic w/ uego and everything is wired up and it runs like stock. (havnt gotten to install the turbo yet)
#59
did u cut of the spliced sections of the harness?? theres a possibility that they are contacting each other when moving. but its kinda hard to see in the video... im running the same set up as you (like scary identical) but on my 01. f/ic w/ uego and everything is wired up and it runs like stock. (havnt gotten to install the turbo yet)
#60
okay well i regretted doing this but the problem is in v2 which i recall u do having frm the video...
i just updated mine right now and my car got hella fucked up... im trying right now to downgrade back to V1 damn....
it idled, then it threw a CEL and it started bogging and drastically changing idle...
i just updated mine right now and my car got hella fucked up... im trying right now to downgrade back to V1 damn....
it idled, then it threw a CEL and it started bogging and drastically changing idle...