Can anyone ID this turbo?
first one is a t3 from a volvo most likely...
looks like a 50trim, remove the compressor housing and measure the diamete of the inducer....
look at the turbine inlet for the A/R of the turbine housing
look at the compressor outlet for the A/R of the compressor housing
the other looks fubar'd...td04H possibly 13C? 15G, simlar to greddy....
looks like a 50trim, remove the compressor housing and measure the diamete of the inducer....
look at the turbine inlet for the A/R of the turbine housing
look at the compressor outlet for the A/R of the compressor housing
the other looks fubar'd...td04H possibly 13C? 15G, simlar to greddy....
Reply
0
0
Thread Starter
Junior Member
Joined: May 2005
Posts: 150
Total Cats: -6
From: Tampa, FL
the one on the right was from my GReddy kit. Blew the journal bearing and shredded the compressor wheel. Had thought to use the old Volvo one, but it's too much effort to make it work. Instead, it is going on our GRM $2007 Challenge car.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
