Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)
-   DIY Turbo Discussion (https://www.miataturbo.net/diy-turbo-discussion-14/)
-   -   Cheap ebay radiator (https://www.miataturbo.net/diy-turbo-discussion-14/cheap-ebay-radiator-26707/)

elesjuan 11-17-2008 02:40 AM

Holy shit yellow..

Sounds like I should pick one of these radiators up too!

SolarYellow510 11-22-2008 11:28 AM

One more thing. I found a 1.25x1.25 square foam strip at Home Depot, meant for stuffing around the edges of a window-mounted A/C unit. It was in the weatherstripping section. I went looking for weatherstripping, but the adhesive-backed stuff was all too small and pretty stiff. This stuff doesn't have the adhesive backing, but is bigger and softer, so it won't apply as much force between the pieces it's sealing.

I cleaned all the oil and coolant residue off the core support, put some double-sided tape on it, and used the foam to seal between the core support and the top of the radiator. Looks clean and weighs almost nothing. Total cost $1.94 with tax for the foam. I still need to get the other three sides of the radiator sealed. They won't be as easy.

BenR 11-24-2008 06:10 PM


Originally Posted by SolarYellow510 (Post 331050)
If you’re handy and well-equipped (I used an air body saw, drill press and 14-in. horizontal disc sander, as well as enough hand tools to pretty much cover my work bench), then this can work. It took basically a whole day, start to finish. This was my first significant experience working on the Miata, so I was taking time for familiarization, too. If you’re expecting to pay someone else to put this in (unlikely around here, but someone from m-dot might get lost when searching for info), don’t even think about it. The labor to fit 1 ½ inches more radiator in the car than stock will be horrifically expensive. If the Koyo or other 37mm options are more bolt-in, they will cost you a lot less in the end.



Crazy. I just bolted mine in and drove it. Took about 15 minutes.

SolarYellow510 11-24-2008 08:49 PM

Are you NA or NB?

I have a '99. Some of the stuff I did was me being ----, some of it would have been a guaranteed long-term failure if not done. I think a straight bolt-in would be possible if you had no A/C or PS. That's what I spent most of the time fiddling with.

ZX-Tex 11-24-2008 10:26 PM

FWIW I have had mine in for about three weeks now and no problems so far.

BenR 11-25-2008 11:55 AM


Originally Posted by SolarYellow510 (Post 333971)
Are you NA or NB?

I have a '99. Some of the stuff I did was me being ----, some of it would have been a guaranteed long-term failure if not done. I think a straight bolt-in would be possible if you had no A/C or PS. That's what I spent most of the time fiddling with.



I have an 91 with no a/c or ps.

leatherface24 11-25-2008 12:38 PM

I thought mine had a leak but it turned out to be a crap hose. All is still well with mine so far.

Atlanta93LE 11-25-2008 01:02 PM

I don't see these available for NA anymore. Am I a blind fool?

akaryrye 11-26-2008 04:02 AM

Looks like they are not up right now, they will probably show up again in a few weeks. JVT radiators is the brand right?

NA6C-Guy 11-26-2008 04:32 AM

Great to see people trying new things. In alot of products like this, lesser companies have very good quality parts. I have a cracked upper hose neck and its seaping a bit, not major, but with this price, why not go ahead with it. Might be purchasing myself one within the week.

akaryrye 11-30-2008 03:41 AM

These are posted now, they are shipping from china though

eBay Motors: ASI aluminum radiator mazda miata MX5 99-05 (item 290274212236 end time Dec-09-08 23:02:44 PST)

NA6C-Guy 11-30-2008 04:08 AM

GOD! Isnt that the damn story. Now all I can find on ebay is the CXRacing for the NB, no more NA models that I can find. Oh well, maybe they will come back one of these days. I was just about to buy one too.

boileralum 11-30-2008 04:50 PM


Originally Posted by NA6C-Guy (Post 335653)
GOD! Isnt that the damn story. Now all I can find on ebay is the CXRacing for the NB, no more NA models that I can find. Oh well, maybe they will come back one of these days. I was just about to buy one too.

cxracing.com: Aluminum Radiator For 90-97 Mazda Miata Manual;Core Size: 25"x13"x2",1.25" Inlet & Outlet

NA6C-Guy 11-30-2008 10:23 PM

Ah cool, I wasnt even aware they had a non ebay store. Good looking out.

akaryrye 11-30-2008 11:39 PM

ya i had seen that too, but its a bit more expensive

... just checked and it comes out to 225 shipped to my house, but thats also with california sales tax, not horrible, but not the smokin deal they were on ebay.

boileralum 12-01-2008 12:41 AM

All of the products on their website are higher than their ebay prices, which is not uncommon with other vendors. My guess is that current supplies are out, and we will have to wait for the manufacturer back in mainland China to send another batch over.

akaryrye 12-13-2008 11:42 PM

just a heads up, the CXRacing radiators for 90-97 miata is back up on ebay for $133 + $30 shipping

SolarYellow510 02-11-2009 11:33 PM

Still going strong. Approaching 5000 miles. No leaks, no problems. :)

BenR 02-12-2009 11:26 AM

Mine's working great as well, though I haven't given it a proper track rogering yet.

MoD_Scotty 02-22-2009 11:13 PM

4 Attachment(s)
I installed a CX-Racing radiator a few weeks ago. It's since been on a couple road trips, and it's been DD'd the whole time. No issues at all. I bought it because when I got my car, the previous owner had "fixed" a leak on the plastic end tank.

fans already swapped over
Attachment 207957

Attachment 207958

"fixed" old radiator
Attachment 207959

It leaves a little less clearance to access the front of the motor, but I think it was worth that small sacrifice.

Attachment 207960


All times are GMT -4. The time now is 03:08 AM.


© 2024 MH Sub I, LLC dba Internet Brands