These are the 2 and 3 bolt 2-3" pipe adapters so you can hook a pipe to your intake and intercooler. I found them at 30-40 bucks a piece which i think is a little high for a 5 dollar flange and a 2" pipe welded to it.

 

If you are using a T25 with the 3 bolt outlet, just grind the ****** off or scavenge ebay. I just sold one for 25.

 

So nobody was stupid enough to buy a OEM turbo like me? i know there has to be a cheap place to buy these!
http://cgi.ebay.com/ebaymotors/GT28R...mZ190200754511
40+15 shipping... i can almost buy a full catback on ebay for that!

 

Yah, I need a set too. I think I'll just grind down the outlet and buy a flange for the inlet.

 

Do you need the ATP one specifically, or would you be open to using the stock adapter(s) from an SR20det?

 

I found the sr20 ones pretty much the same price.

 

PM sent.

 

Just wondering if anyone had any updates as i am ready to order these expensive *** *****.

 

yea i was looking for these as well but i didnt have a clue as to what to call them

 

They are all called something like this "Aluminum - GT28R/GT25R/T25 Compressor Outlet Adapter" They all seem to be made from the same company. Seems like a monopoly, i mean 2 flanges and a 2 1" pipes welded together for 80 bucks?

 

Hope, ATP is the only place that carries them. If you find some another place, they'll be the ATP pieces at a mark-up. Monopoly indeed.

 

Shoot me a PM and we will get you set up with the pieces you need.

 

I built my own using exhaust flanges and welded a couple of 2& 2 1/2" pipes, painted em red and called it good...

There was this guy in TX making them for cheap IIRC his name was Sam, http://www.bmcrace.com/index.php?cPath=132

 

Nice one Kelly, I just noticed your SIGNATURE. I'll remember that for the future.