Which clutch should I get?
http://cgi.ebay.com/ebaymotors/XTD-S...spagenameZWDVW
http://cgi.ebay.com/ebaymotors/F1-RA...QQcmdZViewItem
Should be right around 200whp.
http://cgi.ebay.com/ebaymotors/F1-RA...QQcmdZViewItem
Should be right around 200whp.
Those are the only 2 choices?
Do you really want to save a little money now, to have to pull the tranny again later?
Do you really want to save a little money now, to have to pull the tranny again later?
The F1 looks different than my clutchnet. Mine has the springs totally "wrapped" by the housing vs. open on the ends. The springs on my rebuild Spec just ripped right through the open ends on the plate. I hate changing clutches enough to not risk this job on going cheap. Just not a battle worth losing IMO. Somebody on here has a post where they got one of those eBay clutches and it was bad out of the box. He spent an eternity arguing with the seller who insisted upon sending generalized, non-specific responses regarding the problem.
The 1.8 HD will ABSOLUTELY hold 200. Plenty of folks are running it around 300 wheel. When I was clutch shopping, one of the dudes at FM who I spoke with told me he had 40k miles on his HD at ~300 hp, including track use.
I would go to the safe side and get an XT in 1.6 size. Though the 1.6HD should hold 200 fine.
I would go to the safe side and get an XT in 1.6 size. Though the 1.6HD should hold 200 fine.
good guys...they have their shop right down the street from where I live so I just stopped in and bought my ACT XT from them in person. They know what they are talking about and have damn good prices.
I got the 1.6 XT with an organic street disc. Love it. Holds the power very well. The pedal effort is not too too bad and the engagement point isn't very low at all.
I'm very satisfied with the XT.
I'm very satisfied with the XT.
I can tell you with absolute certainty that the f1 stg3 clutch I have in my car right now said clutchnet on every single part that I received. Additionally, it has been working perfectly in my car since december.
im rocking the SAME clutch.holds 12psi from a gt2560 all day
I like the Centerforce Dual Friction, I will be running it in the miata soon, I have had one in a 360WHP SHO, and in a 294WHP 944. They have nice street drivability, and don't get crunchy where most other clutches do, also I have never had one go out on me.







