that actually looks correct.
|
Originally Posted by Zsanz
(Post 1460264)
This guys looks awfully similar, let me know if I could assist further.
|
Originally Posted by 18psi
(Post 1460238)
I'm more amused that you actually tried, and expected to get something non-retarded, than his response.
|
Originally Posted by Wallyman
(Post 1460274)
Call me a dreamer.. the upside is his response helps me feel a rung or two higher on the evolutionary ladder at least.
|
Originally Posted by Wallyman
(Post 1460273)
Those your or someone local to you? I'm interested if it is a T3 mani, for sure!
Ive asked for his contact info or to post in this thread. |
Originally Posted by Zsanz
(Post 1460281)
Its listed as a T3, this guys not local to me I just saw the listing and remembered this thread so shared the wealth.
Ive asked for his contact info or to post in this thread. |
totally looks like T3 . GET IT.
|
Originally Posted by Braineack
(Post 1460312)
totally looks like T3 . GET IT.
I'm on it like white on rice, just need the contact info that Zsanz is chasing! |
Originally Posted by Braineack
(Post 1460280)
this is how i go though life!
|
Originally Posted by Wallyman
(Post 1460319)
Everyone needs a reference point to help them feel better about themselves. :) Side note, I appreciate you guys helping me out.
https://cimg2.ibsrv.net/gimg/www.mia...cc518665c6.png https://cimg6.ibsrv.net/gimg/www.mia...84202b10d9.png |
Originally Posted by Zsanz
(Post 1460441)
really hope this was to you else somebody else lurking picked this up between 10:10AM and 2:35PM 1/6 .
https://cimg2.ibsrv.net/gimg/www.mia...cc518665c6.png https://cimg6.ibsrv.net/gimg/www.mia...84202b10d9.png |
Originally Posted by Braineack
(Post 1460259)
gotta find the thread where someone drilled a t25 one of these out for t3. ah here: https://www.miataturbo.net/diy-turbo...estions-27799/ btw that first image is Shuiend's -- he may still have that manifold to sell you. What say you guys? |
do you wanna get running again? :P
|
Nothing wrong with plugging the T2 holes, milling it flat, and re drilling/tapping for T3 pattern.
|
Originally Posted by Braineack
(Post 1461234)
do you wanna get running again? :P
|
Originally Posted by TurboTim
(Post 1461248)
Nothing wrong with plugging the T2 holes, milling it flat, and re drilling/tapping for T3 pattern.
|
All times are GMT -4. The time now is 07:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands