EFR6258 v-band clamp

Reply Subscribe

Thread Tools

Search this Thread

Nov 23, 2014 | 07:58 PM

timk

Thread Starter

Senior Member

Joined: Dec 2004

Posts: 1,278

Total Cats: 37

From: Brisbane, Australia

EFR6258 v-band clamp

Hey there,

What v-band clamps are you guys using on the EFR6258?

I tried this kit but the clamp sits awkwardly because of the wastegate outlet. It seems to be too wide to sit properly.

Cheers

Nov 24, 2014 | 01:23 AM

Zoot

Junior Member

iTrader: (3)

Joined: Apr 2011

Posts: 67

Total Cats: 7

From: Chicago

I use the clamp made specifically for the Borg Warner EFR. I believe other non-EFR clamps may have fitment issues, as it seems you have discovered.

3" V-Band Flange Clamp (EFR Turbos) - Full-Race.com

Last edited by Zoot; Nov 24, 2014 at 01:50 AM.

Nov 24, 2014 | 02:03 AM

timk

Thread Starter

Senior Member

Joined: Dec 2004

Posts: 1,278

Total Cats: 37

From: Brisbane, Australia

Thanks Martin, the Aussie suppliers of this turbo don't seem to have one listed hence why it wasn't obvious not all v-band clamps are equal.

This one year, at band clamp...

Nov 24, 2014 | 02:24 AM

Savington

Former Vendor

iTrader: (31)

Joined: Nov 2006

Posts: 15,442

Total Cats: 2,106

From: Sunnyvale, CA

We use/sell a non-BW clamp/flange that is of significantly higher quality than the clamp Borg offers for the turbo.

Nov 24, 2014 | 09:46 PM

Zoot

Junior Member

iTrader: (3)

Joined: Apr 2011

Posts: 67

Total Cats: 7

From: Chicago

^ Wish I had known that when I stripped the threads on my first Borg Warner clamp! Now I know what to get when my current one breaks.

Nov 24, 2014 | 09:49 PM

ftjandra

Junior Member

iTrader: (6)

Joined: Dec 2008

Posts: 289

Total Cats: 8

From: Denver, CO

My clamp is from Treadstone. Is that the BW clamp or the nicer one?

Dec 4, 2014 | 01:29 AM

timk

Thread Starter

Senior Member

Joined: Dec 2004

Posts: 1,278

Total Cats: 37

From: Brisbane, Australia

I managed to get one locally (Australia) from GCG. It's the same brand as the one supplied on the compressor side of the EFR, and it fits perfectly.

Dec 4, 2014 | 08:31 AM

Leafy

Elite Member

iTrader: (1)

Joined: Jun 2012

Posts: 9,491

Total Cats: 105

From: NH

My clamp and exhaust side flange is treadstone as well. But I guess I suck at getting it lined up or something since it seems to leak like a sieve based on the carbon on the flanges, yes they are flat.