I managed to fit an exhaust for an evo VI to my 99ae
Several cuts and welds but not as bad as I was expecting.
I am curious how it will sound

 

It exits underneath car, doesn't go all the way to the back?

 

is that a piece of styrofoam crammed between the exhaust and transmission?

I wanna know how it sounds too.

 

I did that with mine because I cut off a rusty tip. It now ends right inside the bumper skin, which I blame for some extra drone I have now. Might wanna try a turn down tip or something else.

Otherwise, looks fairly good. Did you have a deal on this one? Is that why you used it?

 

 

I will add about a foot of piping to the end of the back box to clear the bumper. (There is suitable bitl left over.) My aim It should look like stock exit but with a larger diameter

If it ends up being too loud I could put a baffle in the back box but hopefully the 2 resonator sections will deaden the sound and reduce rasp.

 

yes, it was a good deal, 50$ on ebay. Here in Slovakia it is difficult to come by Miata parts.

 

I attached a piece to clear the bumper. (The section is removable so a baffle could be added if needed.)

 

http://youtu.be/JfoCtrC7ICQ

I guess it is not too loud for a straight through set up.

 

Sounds great! How is it on the freeway?

 

With the left over bits I made an ear bleeding back muffler.

 

Almost ready to start messing up another perfectly good MX5

 

that sounds awsome. Now you have me thinking.

 

Now lets hear the bleedy one

 

In a few days we will try the bleedy one on a n/a 1.6. I imagine it will sound like a raspy fart can I will post the sound clip!

 

 

Put a turbo on it and it will sound fine.

 

For a second I thought your ramps were headers.

 

me too!