Getting some more bends and my down fabbed tomorrow?
#1
Getting some more bends and my down fabbed tomorrow?
Hey Guys I just need some ideas On what kind of extra bend I'll need for my Ic with the ac and ps
So far I have one straight 90' degree bend and two u bends going 2" all the way,dp 2.5 , should I remove the bumper and big dust shield to make things easier ,around the rad or under the rad , Could I use like 2" rad hose till I get the rest Of my silicone couplers to help piece **** togther(I know it sounds stupid) Im really getting down to business guys and I need your help and oppinions rican Is going boosted by the end of this month
So far I have one straight 90' degree bend and two u bends going 2" all the way,dp 2.5 , should I remove the bumper and big dust shield to make things easier ,around the rad or under the rad , Could I use like 2" rad hose till I get the rest Of my silicone couplers to help piece **** togther(I know it sounds stupid) Im really getting down to business guys and I need your help and oppinions rican Is going boosted by the end of this month
#3
Everyone is in bed, monday mornings suck with no sleep.
The radiator hose should work fine for the time being while you mock up your IC pipes that way you don't buy unnecesary expensive couplers.
Taking the bumper off might make some things easier but it isn't that important.
The ubends will come off the intercooler on each side and you will definitely need more bends than that one extra 90* unless you're doing something I've never seen before or plan on using 90* silicone couplers instead.
The radiator hose should work fine for the time being while you mock up your IC pipes that way you don't buy unnecesary expensive couplers.
Taking the bumper off might make some things easier but it isn't that important.
The ubends will come off the intercooler on each side and you will definitely need more bends than that one extra 90* unless you're doing something I've never seen before or plan on using 90* silicone couplers instead.
#8
Dude flex exhaust Is not air tight, there would be leaks all over the damn place, .......got some more bends today, when I get home I can try to see how things sit togther........Im in trouble though...nobody in this area wants to work with the exhaust flange I have 2" with a 1 1/2" hole type exhaust flange.....As far as ic piping goes IM DONE! My dilema now is finding somone to get a 2.5 down pipe made and with that I have another issue I cant make a 2.5 down pipe when the largest hole On the flange is 2"
#9
Dude flex exhaust Is not air tight, there would be leaks all over the damn place, .......got some more bends today, when I get home I can try to see how things sit togther........Im in trouble though...nobody in this area wants to work with the exhaust flange I have 2" with a 1 1/2" hole type exhaust flange.....As far as ic piping goes IM DONE! My dilema now is finding somone to get a 2.5 down pipe made and with that I have another issue I cant make a 2.5 down pipe when the largest hole On the flange is 2"
Mark
Thread
Thread Starter
Forum
Replies
Last Post