Girly Catch Can Mounted
#63
Elite Member
Thread Starter
iTrader: (5)
Join Date: Jan 2005
Location: Atlanta
Posts: 7,486
Total Cats: 372
I think this one will work. The turbo rx7 guys have been using similar valves with the kynar/teflon construction successfully. Rated at 29"hg/150psi and 400f max momentary temps it should work.
#66
Ok, I contacted the guy with the first auction, he said for a group buy of 20 he'd knock them down 20% to $3.20 each, plus $3 shipping per address (don't know if the 20% applies to that as well). Which makes them very attractive if you want more than one.
I would want at LEAST two, but probably I'd get 5 or so, since they are useful for all sorts of things.
Anyone else want a few? Since they are cheaper than the crappy check valves from your local FLAPS, and 5 of them is cheaper than the fancy ones I see people buying, it might be worthwhile.
Let me know....
I would want at LEAST two, but probably I'd get 5 or so, since they are useful for all sorts of things.
Anyone else want a few? Since they are cheaper than the crappy check valves from your local FLAPS, and 5 of them is cheaper than the fancy ones I see people buying, it might be worthwhile.
Let me know....
#79
Elite Member
Thread Starter
iTrader: (5)
Join Date: Jan 2005
Location: Atlanta
Posts: 7,486
Total Cats: 372
btw
My can has no "stuffing". Just relies on the right angles to send the vapor down and let it condense the walls. Well. I popped the hood to screw with my tps and got a good view of vapor coming through my filter. It looked like a little chimney - so stick something in the can if/when you build it.