Help me remove M45 and install a turbo. - Miata Turbo Forum - Boost cars, acquire cats.

Welcome to Miataturbo.net   Members
 


DIY Turbo Discussion greddy on a 1.8? homebrew kit?

Reply
 
 
 
LinkBack Thread Tools
Old 09-19-2007, 10:50 PM   #1
Cal
Newb
Thread Starter
 
Join Date: Sep 2007
Location: Brisbane, Australia
Posts: 19
Total Cats: 0
Default Help me remove M45 and install a turbo.

I'm wanting to remove my JRSC M45 and replace with a turbo on my NA6 1600. The car already has a Walbro GSS342 high flow fuel pump, injectors (although I might need bigger ones) and a Motec M4 Pro, so it shouldn't be too hard. I was thinking of using an AVO manifold with a T28 turbo. Don't know much about turbo's though. Wanting advice on the turbo, intercooler ect. Everything basically. I intend to keep the internals standard for the moment and was hoping to run about 12-15psi. I want something that spools up fast for quick street/track use. 1/4 mile times are of no interest. Hoping for say 200-220rwhp.

Cheers,

Cal.

Last edited by Cal; 09-19-2007 at 11:12 PM.
Cal is offline   Reply With Quote
Old 09-19-2007, 11:06 PM   #2
Junior Member
 
Join Date: Mar 2005
Location: high performance all year round california
Posts: 82
Total Cats: 0
Default

Gloko is offline   Reply With Quote
Old 09-20-2007, 03:57 AM   #3
Senior Member
iTrader: (1)
 
miataspeed1point6's Avatar
 
Join Date: Feb 2006
Location: Detroit
Posts: 1,235
Total Cats: 0
Default

I did the swap from JRSC M45 to Greddy kit 2 summers ago. I pulled the M45 out in maybe twenty minutes? Took me 3 days to finish up the Greddy install.
Good luck, turbo is much more fun.
miataspeed1point6 is offline   Reply With Quote
Old 09-25-2007, 01:55 AM   #4
Cal
Newb
Thread Starter
 
Join Date: Sep 2007
Location: Brisbane, Australia
Posts: 19
Total Cats: 0
Default

Thanks, thinking AVO manifold, GT2560R turbo, Just Jap intercooler and custom piping.

Cal.
Cal is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Another Cast Manifold Corky Bell Prefabbed Turbo Kits 18 11-22-2016 10:01 PM
OTS Bilstein to motorsports ASN conversion stoves Suspension, Brakes, Drivetrain 5 04-21-2016 04:00 PM
Back to Stock Part Out!! Turbo Parts, MS2 Enhanced 01-05, Suspension, and MOAR! StratoBlue1109 Miata parts for sale/trade 16 10-02-2015 10:39 AM
Walbro 255lph Fuel Pump $50 lsc224 Miata parts for sale/trade 2 10-01-2015 10:17 AM
Low oil pressure after 1.8 swap and new turbo setup JesseTheNoob DIY Turbo Discussion 15 09-30-2015 03:44 PM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -4. The time now is 03:13 PM.