Kraken 2860R setup in car!! Now, really weird idling issues....
Thread Starter
Newb
Joined: Feb 2021
Posts: 25
Total Cats: 0
Kraken 2860R setup in car!! Now, really weird idling issues....
So,
Setup is complete. Went to fire off for the first time today and the idle is really irratic. The AFR's remainded pretty high (in the 17 range) and would drop sufficiently if I bumped the throttle. I didn't let it run for long. Would you guys please look at my log file and my program and give me your input?
I have a schedule for a dyno tune on 5/25 and would love to drive the car if at all possible; but will tow if needed.
Setup: Kraken 2860R topmount, MS3PRO PNP, FlowForce 640 injectors.
Setup is complete. Went to fire off for the first time today and the idle is really irratic. The AFR's remainded pretty high (in the 17 range) and would drop sufficiently if I bumped the throttle. I didn't let it run for long. Would you guys please look at my log file and my program and give me your input?
I have a schedule for a dyno tune on 5/25 and would love to drive the car if at all possible; but will tow if needed.
Setup: Kraken 2860R topmount, MS3PRO PNP, FlowForce 640 injectors.
Reply
0
0
Junior Member
Joined: Oct 2018
Posts: 412
Total Cats: 28
From: Tampa FL
Add fuel to the VE Table in the idle range till its in the 14s, set overboost to a few kPA above wastegate just in case, and run VEAL slowly to tune fuel and you will probably be able to drive it around/to the tuner.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
