drftem

ok can someone give me a picture of were this line goes to? i know one end bolts to the turbo then were on the engine? i got the pics for the return line. i also need to know were i can get what i need to tap for the return. what i meen is the stud that sticks out that the hose goes on i need that . were can i get it?

drftem

from what i see there is a spot already on the cr were the oil return hose is supposed to be ran to. can someone tell me were to find this.i think ive figured out were the oil feed line goes...

Fergus

What ??

1st. Oil Feed Line....goes from a 'port' (take out the bolt) located down under the exhaust manifold, IIR it is the second lower bolt towards the right near the firewall (when your looking directly at the manifold). When you take out the bolt no oil will come out of it....until the engine is turned on.

2nd. Oil return line goes from the Turbo around the front of the engine and plugs into another 'port' (take out the bolt) located on the right side of the oil filter. If looking directly towards the oil filter, is it between the oil filter and alternator (right behind an engine/injector manifold support bracket/bar). Easier to take off that support bar in order to get at it. Remember to ALWAYS have the oil return line going in a continuous downward direction).

What part are you missing ?