|
not cool enough i see...
|
|
Should've half shafted that bad boy. Good enough though, better than no porting at all.
|
I'm still working on it. It may not be pretty, but exactly, better than none at all. In the least I got rid of the lip just before the flapper.
|
aiight, i think im done. removed more material and smoothed shit out. if i gain 2% more flow, that's 2% more flow.
Before: http://www.boostedmiata.com/projects..._notported.jpg After: http://www.boostedmiata.com/projects..._ported004.jpg http://www.boostedmiata.com/projects..._ported001.jpg http://www.boostedmiata.com/projects..._ported002.jpg http://www.boostedmiata.com/projects..._ported003.jpg Basically here's where I removed: http://www.boostedmiata.com/projects...ed_compare.jpg |
I guess you're never removing the butterfly valve....
|
Aren't those rivets and not screws? I don't remember.
|
they are screws. and i haven't removed a butterfly in 13 years since we owned our '93, why would i start now?
|
you guys nothing about no DIY.
|
Sexellent!
Great idea with the boost controller switch. I now must do that too. |
|
LOL @ the picture :-)
Originally Posted by Braineack
(Post 259007)
yeah yeah. it's really just for rainy days and when my dad drives it. I can easily spool it to 10 pounds without trying at part throttle on the highway, and since my auto TB is still sitting on my dining table....
Can I steal that image Joe? (EDIT : this one (didn't see second page) http://img28.picoodle.com/img/img28/...Cm_47b041d.gif ) Fred. |
1 Attachment(s)
|
good boy! im doing the same as you already know :)
|
It's in TPS finally working. I had to perform a few open heart surgeries on the TPS unit itself to get it to work. First the pins on the connector did not make contact to the wiper paths on the inside. Then the wiper brushes themselves needed to be readjusted. So far good. Now to play with TPS stuffs....launch, TPSdot, TPS boost, etc.
|
Originally Posted by UrbanSoot
(Post 261984)
good boy! im doing the same as you already know :)
engine and i just got a new dremmel so i went for it... |
Blah. I had it working this morning was able to play with launch control....then it stopped sending voltage again. I need to get a new TPS unit, my surgeries were unsuccessful it seems. the brushes are too fubared.
launch control is really fun btw. |
it sure damn is, glad you're playing with it now :) i will have to figure out a way to make a switch for my launch control.... wanna school me via PM brain?
|
i figure if I keep the TPS switch at 75% or so I'll never activate it.
|
well i heard you're suppose to run it according to the clutch switch on the car.... and with 100% on the floor with the clutch pedal down, you activate it...
what's weird when i do it is.... ALS activates when it wants to, which is weird. my foot's all the way down on the clutch and if i hold it for a while... ALS activates, and i can't deactivate it.... sorta why i want an actual switch i can flip now lol |
| All times are GMT -4. The time now is 12:41 AM. |
© 2024 MH Sub I, LLC dba Internet Brands