Where to buy a good ceramic ball bearing turbo.
#14
Senior Member
iTrader: (6)
Join Date: Mar 2005
Location: Sammamish, Washington
Posts: 1,396
Total Cats: 0
BB spool is nuts. They spin so freely that on all my buddies cars that run them, you can hear the turbo spin for about 30 seconds after the car is shut off. GT30's and 35's spinning at idle.
#17
Turbonetics GT-K series.. Prepare to open wallet wide.
http://www.turbochargers.com/store/p...roducts_id=455
I can probably get you a little bit better price on that.
http://www.turbochargers.com/store/p...roducts_id=455
I can probably get you a little bit better price on that.
#18
Senior Member
Thread Starter
iTrader: (7)
Join Date: Aug 2007
Location: Southern Indiana
Posts: 1,369
Total Cats: -1
hmm, i was thinking in the $1000 range. I guess my real question then is what is the best turbo to get for around $1000 that will run 14-18 psi and spool quickly. My goal is 250rwhp.
#20
Junior Member
iTrader: (1)
Join Date: Oct 2004
Location: Haarlem ,the Netherlands
Posts: 453
Total Cats: 0
1st get a manifold...
if it is a t2 footprint anything between a t25 and a gt3271r will do it...
What do you want? Spent 1000 dollar on a turbo or just buy a good matched setup.
t3 setups , i think all t3 are capable off 250hp
But why the hp goals?? Just bragging rights?? I think the most fun are the smaller turbo's, just because off their ease off driving... (gt2554r gt2560r)
GTxxxxR means ball bearring
A simple nissan t28 could take you there too...
if it is a t2 footprint anything between a t25 and a gt3271r will do it...
What do you want? Spent 1000 dollar on a turbo or just buy a good matched setup.
t3 setups , i think all t3 are capable off 250hp
But why the hp goals?? Just bragging rights?? I think the most fun are the smaller turbo's, just because off their ease off driving... (gt2554r gt2560r)
GTxxxxR means ball bearring
A simple nissan t28 could take you there too...