My DIY turbo setup.
#21
Elite Member
iTrader: (3)
Join Date: Apr 2008
Location: Outside Portland Maine
Posts: 2,023
Total Cats: 19
Mine doesn't say 14b on it, but it says TD05, and the auction on ebay said 14b. The auction is gone from the site, so I don't know what exactly he said it came from.
My turbo is not the same as yours, the hot side of the compressor points in a different direction and my WG actuator is a little different.
You mention at the top of this page something about a different actuator for lower pressure... where do you find one of those? The stock actuator on mine is for about 7.5psi and I wouldn't mind having one for a little less boost for use in winter or something
My turbo is not the same as yours, the hot side of the compressor points in a different direction and my WG actuator is a little different.
You mention at the top of this page something about a different actuator for lower pressure... where do you find one of those? The stock actuator on mine is for about 7.5psi and I wouldn't mind having one for a little less boost for use in winter or something
#22
Junior Member
Thread Starter
iTrader: (3)
Join Date: Jul 2008
Location: Pinellas park Fl
Posts: 308
Total Cats: 1
Ill have to look at it and see what it says.
I couldnt find much on weaker actuators, most people just put a reverse helper spring on it.
Ive decided to just get MS and bigger injectors to run 10-12psi.
I couldnt find much on weaker actuators, most people just put a reverse helper spring on it.
Ive decided to just get MS and bigger injectors to run 10-12psi.
Thread
Thread Starter
Forum
Replies
Last Post