Mystery injectors - Miata Turbo Forum - Boost cars, acquire cats.

Welcome to Miataturbo.net   Members
 


DIY Turbo Discussion greddy on a 1.8? homebrew kit?

Reply
 
 
 
LinkBack Thread Tools
Old 10-25-2007, 08:26 PM   #1
Junior Member
Thread Starter
 
Join Date: May 2006
Location: Portland, OR
Posts: 70
Total Cats: 0
Default Mystery injectors

Got some free injectors from a friend of mine only he dosen't remember what they are.

Anyone recognize either of these?

Name:  injector2.jpg
Views: 2
Size:  30.4 KB

Name:  injector1.jpg
Views: 2
Size:  33.8 KB
Agent935 is offline   Reply With Quote
Old 10-25-2007, 08:32 PM   #2
I'm Miserable!
iTrader: (-1)
 
Join Date: May 2007
Location: West Sacramento Ca
Posts: 948
Total Cats: 0
Default

Read through Scotts faq and try to figure it out that way, narrow them down by the ohms. from the tabs. then the color of the tops.. or you can just look up their id numbers haha
Slidin'Miata916 is offline   Reply With Quote
Old 10-25-2007, 08:37 PM   #3
Ben
Supporting Vendor
iTrader: (33)
 
Ben's Avatar
 
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,689
Total Cats: 99
Default


look them up by the part number printed on the side
Ben is offline   Reply With Quote
Old 10-25-2007, 09:01 PM   #4
Boost Pope
iTrader: (8)
 
Joe Perez's Avatar
 
Join Date: Sep 2005
Location: Chicago (Over two miles from Wrigley Field. Fuck the Cubs. Fuck them in their smarmy goat-hole.)
Posts: 26,318
Total Cats: 1,916
Default

The one on the left is from a silver 1992 Ford Taurus with 15" alloy wheels and the leather package.

The one on the right is either an '92 Accord with an automatic transmission and factory tinted windows, or a '93 Integra with a manual gearbox and A/C, but without ABS.


Or you could just Google the numbers stamped into the side of the injectors.
Joe Perez is offline   Reply With Quote
Old 10-25-2007, 09:19 PM   #5
Senior Member
iTrader: (4)
 
Join Date: May 2007
Location: Ontario
Posts: 790
Total Cats: 0
Default

Quote:
Originally Posted by Joe Perez View Post
The one on the left is from a silver 1992 Ford Taurus with 15" alloy wheels and the leather package.

The one on the right is either an '92 Accord with an automatic transmission and factory tinted windows, or a '93 Integra with a manual gearbox and A/C, but without ABS.

HAHAHAHA. That was pro.
reddroptop is offline   Reply With Quote
Old 10-25-2007, 09:57 PM   #6
Junior Member
Thread Starter
 
Join Date: May 2006
Location: Portland, OR
Posts: 70
Total Cats: 0
Default

Google is my friend

the black tops are Denso 440cc 2.8ohm

and the yellow top are JEC 375cc 2.2 ohm
Agent935 is offline   Reply With Quote
Old 10-25-2007, 11:12 PM   #7
Junior Member
 
Join Date: Jul 2006
Posts: 88
Total Cats: 0
Default

Quote:
Originally Posted by Agent935 View Post
Google is my friend

the black tops are Denso 440cc 2.8ohm
Yes looks to be from a 7MGE Turbo Supra. Should be direct fit if you use resistors.
retro is offline   Reply With Quote
Old 10-25-2007, 11:26 PM   #8
Junior Member
Thread Starter
 
Join Date: May 2006
Location: Portland, OR
Posts: 70
Total Cats: 0
Default

Yeah. That's what I was guessing. My friend said both sets were from toyotas. The yellow ones might be 4a-gze injectors.
Agent935 is offline   Reply With Quote
Old 10-26-2007, 04:23 AM   #9
Junior Member
 
Join Date: Oct 2004
Posts: 171
Total Cats: 3
Default

4agze injectors are red/orange colour, The same as fitted to the JDM spec 323 GTR
4sfed5 is offline   Reply With Quote
Old 10-26-2007, 12:24 PM   #10
Junior Member
Thread Starter
 
Join Date: May 2006
Location: Portland, OR
Posts: 70
Total Cats: 0
Default

The size is right at 370cc. Did the 4agze in the MR2 use the same injectors as the one in the non US AE92?
From the serial number they look like they were also uses in RB series motors but my friend is pretty sure they were out of a toyota of some sort.
Agent935 is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Project Gemini - Turbo Civic on the Cheap Full_Tilt_Boogie Build Threads 58 Yesterday 10:04 PM
Changing from 460cc to flow force 610cc in diypnp 90 Turbo MEGAsquirt 19 10-19-2015 04:23 PM
Back to Stock Part Out!! Turbo Parts, MS2 Enhanced 01-05, Suspension, and MOAR! StratoBlue1109 Miata parts for sale/trade 16 10-02-2015 10:39 AM
Going back to stock. Need some 1.6 parts. Trent WTB 2 10-01-2015 01:15 PM
Time to start learning and play with tuning The Gleas MEGAsquirt 3 10-01-2015 10:30 AM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -4. The time now is 03:26 PM.