o2 Clamp need a part
#1
Junior Member
Thread Starter
iTrader: (6)
Join Date: Feb 2009
Location: Salinas, CA
Posts: 445
Total Cats: 1
o2 Clamp need a part
I bought an o2 clamp from the classfieds and it is missing a piece. It is a Flyin Miata first generation clamp with seperate switch. It is missing the little spring that goes under the brass adjusting screw. Any one know how I can source one? I was almost thinking of trying a spring from bic clicker pen. $20 for the clamp so I am not to worried if have to toss it.
Thanks
Thanks
#2
Junior Member
Thread Starter
iTrader: (6)
Join Date: Feb 2009
Location: Salinas, CA
Posts: 445
Total Cats: 1
Fixed it . Took a spring from a bic clicker pen, chopped it to 3/8" and so far so good. I tested it with a hand vacuum pump at 2 Hg and it activates and holds.
And thanks FM for the tech support
And thanks FM for the tech support
#3
Nice work on the fix. I bought a used clamp too and I'm worried about it not working (paranoid I guess). I am still trying to figure out more about it. It's a Flying Miata O2 clamp. I have no instructions. It does have an adjustment screw, just one. I've been searching, but having rouble finding info that helps. Do you think you might be able to help?
#4
Junior Member
Thread Starter
iTrader: (6)
Join Date: Feb 2009
Location: Salinas, CA
Posts: 445
Total Cats: 1
No problem here is the link to FMs pdf file. Maker sure you have acrobat reader.
http://www.flyinmiata.com/support/in...e%20switch.pdf
btw it is very easy to bench test with a hand vacuum pump.
http://www.flyinmiata.com/support/in...e%20switch.pdf
btw it is very easy to bench test with a hand vacuum pump.
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM