are we sure this not troll?
|
2 Attachment(s)
Originally Posted by spag
(Post 831691)
And what would cause the car to backfire and shutter so hard when hitting boost at lower rpm (at high rpm it is not a problem and the only time I have hit any sort of boost)
What I have done which really helps is open up the wastegate completely (un attached the wastegate actuator) and I don't have problems and only get boost at 6000 rpm I'm thinking this guy is a total troll at this point. https://www.miataturbo.net/attachmen...ine=1328631944 |
In for the blown block pics!!!
|
Where are you located? I'll have a 91 1.6L for sale soon.
Also whoever gave this poor guy -1 on every post is a dick. so I fixed it. |
I've got a 1.6l sitting in my storage room too.
|
Sorry, posted wrong place :vash:
|
I am really not trolling, i was hoping that the meth would make up for the lack of fuel, and i have reason to believe that.
On my mazdaspeed when you hit about 325-350whp you start to have fuel problems, the crank driven fuel pump cannot keep up and your fuel pressure drop from the ideal 1900 psi till 0 where your engine goes kaboom. Now i was going to buy anew fuel pump but my friend had a Stage 3 methanol injection kit that he said i should give a try to see if it would remedy my problem. So an hour later with the kit installed we take it out for a spin and Bam! no more fuel problems! It also made my car scary fast (its like adding boost to boost) I was running PIG PIG rich (in the 9-10 range) I was hoping the same effect would happen with the miata. I guess not, going to do a compression test tomorrow and i will let you know if i will be getting a new engine or not (P.S. i live in Canada) |
Lol @ adding boost to boost!
Your miata was not factory boosted, so the stock computer will not add fuel in boost. Your fuel pressure won't increase, and meth has nothing to do with adding fuel. You need to find a way to make your car add fuel when it goes into boost, it's the simple. |
Wow. Trollmastahhhhh
|
Crank driven fuel pump?:nuts:
|
Originally Posted by flounder
(Post 832276)
Crank driven fuel pump?:nuts:
|
Originally Posted by levnubhin
(Post 831792)
so much fail.
1. Sell WI kit, buy proper engine management and WB 3. Tune your car 2. Hope you didn't kill your motor. 4. buy civic |
My Opel Olympia -56 has a crank driven fuel pump. So does old Volvos and I am sure more. I am also sure this dude is a troll, however trolling quite well.
If I am wrong, we have once again proof that the Miata engine is a strong little bugger. 2months of 8psi with no extra fuel and still running? Respect. |
1) mazdaspeed3 have direct injection. hence 1900psi fuel pressure.
2) they also have camshaft driven fuel pump http://edgeautosport.com/products/CP...3-HPFpump.html The high-pressure fuel pump used on the Mazda vehicles is mechanically coupled to your camshaft edit: to clarify, the high pressure fuel pump is in addition to a regular, submerged in-tank low pressure fuel pump. yes, two ****ing pumps |
|
Running a 9 or 10 afr will wash the cylinder walls clean of oil, if it would even run. At that point the oil pan will be soo full of fuel that you would have to stop trollin.
|
So the miata received a bit of love today and the engine really is a strong mother F*****
Compression test put out a nice 210 - 225 - 200 - 210 Got new Plugs and she is back to purring like a little kitten. I will be getting some sort of engine management either way, or maybe trying putting gas into the meth injection kit hmmmmmmm... |
Originally Posted by spag
(Post 832641)
So the miata received a bit of love today and the engine really is a strong mother F*****
Compression test put out a nice 210 - 225 - 200 - 210 Got new Plugs and she is back to purring like a little kitten. I will be getting some sort of engine management either way, or maybe trying putting gas into the meth injection kit hmmmmmmm... Have you any idea what you are doing? __________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Originally Posted by levnubhin
(Post 832643)
Have you any idea what you are doing?
Fine there I was messing around a bit, I would never do that |
just remove your wastegate actuator for now :facepalm:
|
All times are GMT -4. The time now is 11:41 AM. |
© 2024 MH Sub I, LLC dba Internet Brands