Notices
DIY Turbo Discussion greddy on a 1.8? homebrew kit?

SR20 overboosting problems

Thread Tools
 
Search this Thread
 
Old Mar 18, 2012 | 05:47 PM
  #21  
Ryanxstorey's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Dec 2011
Posts: 141
Total Cats: 1
Default

Ok so new info, I got the arm off and the flapper does open all the way. So does this mean the actuator is bad?
Old Mar 18, 2012 | 08:06 PM
  #22  
dgmorr's Avatar
Senior Member
iTrader: (4)
 
Joined: Nov 2009
Posts: 1,446
Total Cats: 6
From: Toronto, ON
Default

Low psi and stock internal wg could do it.
Old Mar 19, 2012 | 08:52 AM
  #23  
Braineack's Avatar
Boost Czar
iTrader: (62)
 
Joined: May 2005
Posts: 80,552
Total Cats: 4,368
From: Chantilly, VA
Default

Originally Posted by blaen99
Disconnect the wastegate [arm] completely, then try to run the car.

JUST DO THIS ALREADY and REPORT BACK!

Old Mar 19, 2012 | 09:08 AM
  #24  
Ryanxstorey's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Dec 2011
Posts: 141
Total Cats: 1
Default

I'm sorry I thought I posted that I did do that. First I tested the actuator by using a compressor, then I removed the arm and the wastegate opened freely. Drove it without the arm on and yea no overboosting. When I put air to the actuator I could hear and feel air looking through it.
Old Mar 19, 2012 | 09:25 AM
  #25  
Braineack's Avatar
Boost Czar
iTrader: (62)
 
Joined: May 2005
Posts: 80,552
Total Cats: 4,368
From: Chantilly, VA
Default

okay, your actuator is dead, get a new one.
Old Apr 6, 2012 | 07:47 AM
  #26  
new2mx5's Avatar
Newb
iTrader: (3)
 
Joined: Dec 2010
Posts: 26
Total Cats: 0
Default

Did you replace your actuator yet? If so where did you source it and what final psi did you end up running?
Old Apr 6, 2012 | 08:58 AM
  #27  
Ryanxstorey's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Dec 2011
Posts: 141
Total Cats: 1
Default


Top actuator is the stock poop one. Bottom one is a 10 psi actuator that the previous owner of the turbo gave me when I bought it.


Taddaaaa.
Easiest way to get the 10 psi actuator to work with how the turbo is clocked. I am actually running 14 psi with a mbc right now.
Attached Thumbnails SR20 overboosting problems-b4e56b4d.jpg   SR20 overboosting problems-302529af.jpg  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
Oct 26, 2018 11:00 PM
elesjuan
Build Threads
7
Nov 3, 2015 01:51 PM
mx592
Suspension, Brakes, Drivetrain
1
Oct 1, 2015 12:45 AM
interestedofold
Suspension, Brakes, Drivetrain
5
Sep 29, 2015 01:42 PM




All times are GMT -4. The time now is 08:31 AM.