sr20dset t25 and megan racing
#1
Junior Member
Thread Starter
Join Date: Aug 2006
Location: Colorado Springs, Co
Posts: 81
Total Cats: -1
sr20dset t25 and megan racing
my shop wants to know it the t25 from the sr20det will fit the megan racing manifold/downpipe? if so he wants to buy one for my car and ad some bracing to see if he can deal with cracking.
we know the sites list mitsubishi 16g/t25 but we are curious about the sr's turbo
which also means less money i have to spend!! and the sooner the turbo will be running!!
we know the sites list mitsubishi 16g/t25 but we are curious about the sr's turbo
which also means less money i have to spend!! and the sooner the turbo will be running!!
#8
The MR Mani is made for a Mitsu round type T25 turbine inlet flange and will not be compatible with the standard T25 square flange found on the SR20det turbine housing. However, since the CHRA's of T25's are the same, you can substitute just about any compressor or turbine housing for any other one. I've got 3 2gDSM turbine housings, PM me if you're interested. You can use it on your SR20det turbo an it will mate directly to the Megan Manifold... I've even got a ported one! See pics. It is not however, the standard T25 5-bolt flange patters... it's some stupid 2g specific 4-bolt design. And you'll have to drill/tap new wastegate actuator mounting holes in the compressor housing (no problem) as the wastegate itself isn't in the same position.
The adapter is a bad idea. The Megan has some history with cracking. The adapter that goes between the turbo and Mani is about 2 inches long and places the turbo further away from the block, amplifying the stress through the entire manifold.
http://cgi.ebay.com/SR20DET-T25-T28-...QQcmdZViewItem
The pic is of two of my housings, one ported, one not.
The adapter is a bad idea. The Megan has some history with cracking. The adapter that goes between the turbo and Mani is about 2 inches long and places the turbo further away from the block, amplifying the stress through the entire manifold.
http://cgi.ebay.com/SR20DET-T25-T28-...QQcmdZViewItem
The pic is of two of my housings, one ported, one not.
Last edited by samnavy; 08-01-2007 at 09:44 PM.
Thread
Thread Starter
Forum
Replies
Last Post