Notices
DIY Turbo Discussion greddy on a 1.8? homebrew kit?

Stall on Acceleration

Old May 28, 2019 | 02:47 PM
  #1  
teethdoc's Avatar
Thread Starter
Newb
 
Joined: May 2019
Posts: 10
Total Cats: 0
Default Stall on Acceleration

1991 1.6 Turbo charged with MS2 tuner.

Idles fine (especially once it warms up) If you just barely push the accelerator it stalls completely out. I have to give it a lot of gas to "get over the hump" then let the rpms go back down a tad before easing out the clutch. It does this in gear or not. Clutch depressed or not. It gets a little better as it warms up, but still there. Otherwise it runs smooth as silk.

I can post dat log and current tune when I get home from work.
Old May 28, 2019 | 02:59 PM
  #2  
HowPrayGame's Avatar
Junior Member
 
Joined: Oct 2018
Posts: 412
Total Cats: 28
From: Tampa FL
Default

Check your acceleration enrichment values
Old May 28, 2019 | 03:03 PM
  #3  
teethdoc's Avatar
Thread Starter
Newb
 
Joined: May 2019
Posts: 10
Total Cats: 0
Default

Originally Posted by HowPrayGame
Check your acceleration enrichment values
Would it be too rich and flooding it, or too lean and starving it?
Old May 28, 2019 | 03:34 PM
  #4  
gooflophaze's Avatar
Senior Member
 
Joined: May 2007
Posts: 997
Total Cats: 156
From: Atlanta
Default

Originally Posted by teethdoc
Would it be too rich and flooding it, or too lean and starving it?
Yes.

This is why a log is needed.
Old May 28, 2019 | 03:36 PM
  #5  
teethdoc's Avatar
Thread Starter
Newb
 
Joined: May 2019
Posts: 10
Total Cats: 0
Default

Originally Posted by gooflophaze
Yes.

This is why a log is needed.
Lol. Fair enough. I'll download the log this evening.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
xmacmiatax
MEGAsquirt
11
Aug 15, 2019 04:14 AM
David_Adams
MEGAsquirt
3
Apr 30, 2016 09:41 PM
Deanotech
MEGAsquirt
0
Sep 11, 2014 10:28 AM
Mazdaspeeder
MEGAsquirt
29
May 22, 2014 02:31 PM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 11:21 AM.