Okay, i have my sr20 turbo this is what i have so far:

-4an SS line
the appropriate fittings for the feed and a restrictor built in.
a 1/2 -> 5/8th slip on barb

I am ordering:

the adapter plate for the 1/2 barb
5/8th line
another 1/2 barb for the drill/tap on the oil pan
and 5'16th line (for water )

What i need:
The drain and feed bolt (barb slip on style) for water feed and return.

my question is this, what size bolt to slip on am i looking for a t25 for it to screw into the turbo?




PS only thing after this i need is intercooling pipes than it's off to exhaust shop and than... boost.

 

Just take it to fastenal or some other fastener store and try to match it up. GL tom i told you it would be quick and easy.

 

quick and easy are relative terms. If by easy you don't mean cheap, than yes. If you mean quick as in being indecisive and taking 3 months than yes also.

 

shoulda got a 1.6 then everyone knows they are faster anyway.

 

haha but i'm abusive (ask my girl) just kidding, i woulda tore that rear end in a second.. ( again ask my girl hah j/k)

 

nice rip that *** up on the streets yo.