Intercooler help. Im trying something different
#1
Elite Member
Thread Starter
iTrader: (10)
Join Date: Dec 2006
Location: Pembroke Pines
Posts: 4,064
Total Cats: 10
Intercooler help. Im trying something different
Ive been trying to find the right size for where I want to mount my intercooler which is in the top cut out here:
So far, all that I can find that will fit there with minimal cutting is this Mr2 intercooler:
http://cgi.ebay.com/ebaymotors/CXRac...mZ330270629408
Ideally, id like to have a 24X6x2.5 or 3 intercooler but so far, i can find anything that size without having to go custom.
The piping ive already got sorted out so im not worried there. Do any of you guys have any idea if that size intercooler exists and where i could get it? Alos, it would have to have the endtanks like the MR2 intercooler because im going to run the piping up through where the hood latch assembly once was. I alreday cut out enough of my hood so I have 2.5 inches of clearance between the hood and the frame. Any positve input would be appreciated.
So far, all that I can find that will fit there with minimal cutting is this Mr2 intercooler:
http://cgi.ebay.com/ebaymotors/CXRac...mZ330270629408
Ideally, id like to have a 24X6x2.5 or 3 intercooler but so far, i can find anything that size without having to go custom.
The piping ive already got sorted out so im not worried there. Do any of you guys have any idea if that size intercooler exists and where i could get it? Alos, it would have to have the endtanks like the MR2 intercooler because im going to run the piping up through where the hood latch assembly once was. I alreday cut out enough of my hood so I have 2.5 inches of clearance between the hood and the frame. Any positve input would be appreciated.
#2
Elite Member
Thread Starter
iTrader: (10)
Join Date: Dec 2006
Location: Pembroke Pines
Posts: 4,064
Total Cats: 10
I forgot to mention that im going to be making a shroud for the intercooler. I plan on boosting no more than 10-12 psi so the way i see it, the smaller intercooler would be ok.
#15
Elite Member
Thread Starter
iTrader: (10)
Join Date: Dec 2006
Location: Pembroke Pines
Posts: 4,064
Total Cats: 10
LOL I was wondering what the hell the brass ***** were for untill i read why its there Thanks Ben. Now, the bumper is a C-West piece but be fore warned, its only the bottom half of the bumper that you get. I had to mold it on to the oem bumper and cut alot out of it to get it to fit right. I may do a 24x12 intercooler and fill both the bottom and the top in one shot but im not to sure yet. Part of the alure of putting the I.C. at the top is having shorter piping.
#17
Elite Member
Thread Starter
iTrader: (10)
Join Date: Dec 2006
Location: Pembroke Pines
Posts: 4,064
Total Cats: 10
and go to everyones favorite site (lol) for a profile view
www.clubroadster.net
#19
Elite Member
iTrader: (21)
Join Date: Jun 2006
Location: Point Pleasant, NJ
Posts: 2,957
Total Cats: 2
My 25x12 is flipped so the inlet/outlet are at the top for shorter piping. The piping comes in from under the headlights which are fixed.
Looks like it'd fill that hole nicely
Looks like it'd fill that hole nicely
Last edited by paul; 09-18-2008 at 12:00 AM. Reason: added pics