1 Attachment(s)
313whp old td06-20g vs new gt35r 366whp the trq is later on the gt35r
Attachment 212789
Originally Posted by y8s
(Post 266473)
ok I had to look at those numbers again ... you say it's a 2.2? with a GT35R? There's some torque missing below 4500. my puny 1.8 has 200 ft-lbs at 3800 at 10 psi.
what kind of boost control are you using? |
I dunno man, that torque curve on the old turbo is pretty nice ... looks like you had an extra 50ft/lbs of torque between 4k and 5k and more overall power across the board right up until 6k. Nice peak power though, that should get some good 1/4 mile times.
|
3 Attachment(s)
sorry to threadjack, but since you guys like mr2's,, this is my cousins monster build
holset from diesel truck :eek5: it almost done Attachment 212786 Attachment 212787 Attachment 212788 |
heard about that car he is building a lil monster, cheaper than gt35r no ball bearing
|
but the 35r pulls like a beast.:)
Originally Posted by akaryrye
(Post 266562)
I dunno man, that torque curve on the old turbo is pretty nice ... looks like you had an extra 50ft/lbs of torque between 4k and 5k and more overall power across the board right up until 6k. Nice peak power though, that should get some good 1/4 mile times.
|
Originally Posted by deseroner
(Post 266489)
I got st sway bars,fr/rear strut bars,front lower bar,255 in rears and 215 front,solid front end links,eibach pro kit springs but nowhere near a miata na on handles w/same setup, on my old miata had sway bars also and shocks,stiff springs,plus my wife misses my miata, hates my mr2 :)
I think you'll be suprised once you throw some decent shocks on there. The N/A Mk2 has a pretty well documented history of dominating the NA chassis miata in stock class autocross. Once you start straying much farther than that as with anything, all bets are off. |
MK2 SW20 n/a motor dominates auto-x, even more so the 93+ with the revised suspension
|
5 Attachment(s)
oh more progress today put the spal fans, and put the ems sidemount blocker and cut a hole for airflow for rear just need hyde's old exhaust(traded pex) need single, and garage fukui air duct, iam finish ready for e85 next month in concord yeah.....and maybe a retune w/ricky with e85
Attachment 212731 Attachment 212732 Attachment 212733 Attachment 212734 Attachment 212735 |
here is a video of car cruising http://i157.photobucket.com/albums/t...h_Untitled.jpg
|
/\ Sickkkk
|
5 Attachment(s)
now finish I am probably at 380whp or more now on pump 20psi boosting daily, here is some pics of my tmic garage fukui trunk air duct.
Attachment 212440 Attachment 212441 Attachment 212442 Attachment 212443 Attachment 212444 |
5 Attachment(s)
hello, update went crazy and made it a time attack car.
Attachment 190832 Attachment 190833 Attachment 190834 Attachment 190835 Attachment 190836 |
5 Attachment(s)
|
5 Attachment(s)
Attachment 190822
Attachment 190823 Attachment 190824 Attachment 190825 and new tires and 57d rim . Attachment 190826 |
5 Attachment(s)
some pics of block without pistons , engine is gotbuilt by hasselgren , cp stroker pistons,knife edge 5sfe crankshaft(castillo crankshaft)00 , 3sgte eagle rods,arp main studs,caldina short block(gen 4),apexi gen 3 head gasket 1.2mm ,caldina stock oil cooler,greddy oil cooler underneath mount car,acl thrust washer , king main bearings, clevite 3sgte rod bearings. new exhaust manifold with bar,new rear toe rods,front control arm pillow bushings.
Attachment 190817 pic before tear down,old block Attachment 190818 Attachment 190819 Attachment 190820 Attachment 190821 |
5 Attachment(s)
|
5 Attachment(s)
|
on a side note wish I had built my miata like this maybe 2.0 made stroker in 91 na
|
3 Attachment(s)
Attachment 190804
Attachment 190805 Attachment 190806 went haltech p1000 with racepak.also tranny 4.5 final gear ratio.1200cc, aeromotive 340 fuel pump,gt35r ,2.2 stroker knife edge , 9:0 comp cp pistons,eagle rods,apexi hg 1.2mm , 268 gsc cams, greddy timing belt,kw coilovers,flat underbody, nt01 all fours , gram lights 57d 17x9 all four.all pillow bushings in suspension no bushings.lots of stuff to enter. |
That is a really badass mr2 and setup you got going on.
Looks like it will be nasty. Something I don't understand about the IC though, maybe you can clear it up for me: Its routed through the trunk, and mounted on the floor of the trunk????? So there's essentially no airflow going through it but air just being pushed to it? Also isn't there a hot ass exhaust directly underneath the floor board its mounted to? Just seems inefficient as hell |
All times are GMT -4. The time now is 04:31 PM. |
© 2024 MH Sub I, LLC dba Internet Brands