VVT engine swap (lots of mods)
#1
VVT engine swap (lots of mods)
I wanted to share the final dyno PTuning in VA came up with for me. I felt great numbers for a Dyno Dynamics! Much thanks to Keegan for the amazing engine build. It was a lot of fun on the track. Only change I am going to make is the exhaust to the 2.375 Fujitsubo in hopes to maybe gain some up top.
Here is a fairly complete list of mods:
1994 Body
2001+ VVT Engine with CNC port and polished head
Custom Cam Shafts
+1mm valves
Flow Force 640 Injectors
84MM 11:1 pistons
Thermal Coating on pistons, combustion chamber,valves, and exhaust ports
Skunk TB
Flat top intake manifold port matched to TB and intake ports
3d printed intake
RB header and Goodwin exhaust 2.25 inch exhaust
8000k redline (all the reliability mods for this)
MSLabs MS3 Basic
Here is a fairly complete list of mods:
1994 Body
2001+ VVT Engine with CNC port and polished head
Custom Cam Shafts
+1mm valves
Flow Force 640 Injectors
84MM 11:1 pistons
Thermal Coating on pistons, combustion chamber,valves, and exhaust ports
Skunk TB
Flat top intake manifold port matched to TB and intake ports
3d printed intake
RB header and Goodwin exhaust 2.25 inch exhaust
8000k redline (all the reliability mods for this)
MSLabs MS3 Basic
#8
Nice work. I had a similar combination without the internal work (stock cams, stock VVT) and made 151whp. People thought I was full of crap. VVT, flat top and that 3d printed intake work!
Edit - didn't realize this was a necro thread... my bad...
Edit - didn't realize this was a necro thread... my bad...
Last edited by Morello; 02-11-2019 at 09:15 PM.
Thread
Thread Starter
Forum
Replies
Last Post