EMB on 99 Not Starting
#1
Junior Member
Thread Starter
iTrader: (3)
Join Date: Mar 2008
Location: Sunnyvale, ca
Posts: 220
Total Cats: 0
EMB on 99 Not Starting
Hi guys..
I have a boomslang harness for my EMB on my 99 miata and the car isnt starting. It just cranks but doesnt start.
I have the resistor soldered in, but the thing I am confused about is the pot settings. I have instructions that came with my emb, but they are copies or print outs and i am not sure how legit they are. (EMB was bought used)
From what the paper said, my pot settings where supposed to be 3 A 0.
is this correct? i saw another thread on here where someone was using the same settings but they where for either a 1.6 or for an earlier year 1.8.
Can someone point me to the correct settings or tell me what its supposed to be?
What else can be the problem? Airflow is supposed to be set at MZ_HW-1, right? any other settings i am neglecting?
Thanks,
Henry
I have a boomslang harness for my EMB on my 99 miata and the car isnt starting. It just cranks but doesnt start.
I have the resistor soldered in, but the thing I am confused about is the pot settings. I have instructions that came with my emb, but they are copies or print outs and i am not sure how legit they are. (EMB was bought used)
From what the paper said, my pot settings where supposed to be 3 A 0.
is this correct? i saw another thread on here where someone was using the same settings but they where for either a 1.6 or for an earlier year 1.8.
Can someone point me to the correct settings or tell me what its supposed to be?
What else can be the problem? Airflow is supposed to be set at MZ_HW-1, right? any other settings i am neglecting?
Thanks,
Henry
#9
Junior Member
Thread Starter
iTrader: (3)
Join Date: Mar 2008
Location: Sunnyvale, ca
Posts: 220
Total Cats: 0
can someone please verify if MZ_HW-1 is correct? i looked at a map for an earlier year miata and it had a different "airflow" setting. I havent seen anywhere where this is really discussed.. again i have a wierd/shady photocopy or printed out manual not necessarily from greddy..
#10
Junior Member
Thread Starter
iTrader: (3)
Join Date: Mar 2008
Location: Sunnyvale, ca
Posts: 220
Total Cats: 0
I also just realized that under engine model, it says B6-ZE, BP-ZE. is this correct? i looked at a map for an earlier year miata, 1.6 na and it had just b6-ze. could this be giving me problems?
#12
Junior Member
Thread Starter
iTrader: (3)
Join Date: Mar 2008
Location: Sunnyvale, ca
Posts: 220
Total Cats: 0
so if under engine model mine says "B6-ZE, BP-ZE" is this correct or incorrect? sorry i am kind of confused since it seems like i have 2 different things selected? or is what i have correct?
#16
Junior Member
Thread Starter
iTrader: (3)
Join Date: Mar 2008
Location: Sunnyvale, ca
Posts: 220
Total Cats: 0
Yea if u could email them to me it would be awesome! I don't have the publication u took that link from.. If you could email it to serper3@sbcglobal.net it would be great! If u don't mind, I can also post it on the emb yahoo group since its not on there now and I am sire others would find it very useful as well.
Thanks!
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM