E-Manage Post your questions about greddy e-manage installation and tuning here.

EMB Map help

Old 03-12-2012, 04:35 PM
  #1  
Senior Member
Thread Starter
 
sturovo's Avatar
 
Join Date: Apr 2011
Location: Martin, Slovakia
Posts: 507
Total Cats: 74
Default EMB Map help

Hi,
I am looking for base EMB autotune maps for my 1.8l 99AE.

I'm using a 3 bar V.W. map sensor and 315cc Toyota injectors, a td04-13t turbo with a 7psi waste gate actuator. My stock timing is 12 degrees, (2 degrees advanced by crank sensor mod) I have a wide band but I would prefer to use the stock lambda sensor for auto tune and the wide band for monitoring. I have stock coils/spark. The exhaust is 2.75 inch straight through with a removable cat. The auto tune circuit is activated by an adjustable map voltage comparator and is currently set to switch at 1.68 volts with a 0.1v decreasing dead band.

Any help would be much appreciated.
sturovo is offline  
Old 03-16-2012, 12:44 PM
  #2  
Senior Member
Thread Starter
 
sturovo's Avatar
 
Join Date: Apr 2011
Location: Martin, Slovakia
Posts: 507
Total Cats: 74
Default

No stress, I figured out what was needed. The timing map was 1 degree per psi. O2 Lambda mapped to TPS, TPS vs air flow for negative corrections and TPS vs additional injection for positive corrections.
I am surprised how well it works
sturovo is offline  
Old 03-16-2012, 05:02 PM
  #3  
Senior Member
Thread Starter
 
sturovo's Avatar
 
Join Date: Apr 2011
Location: Martin, Slovakia
Posts: 507
Total Cats: 74
Default


6000 rpm in 3rd is 100 kph?
Attached Images
File Type: jpg
Untitled-1.jpg (48.8 KB, 87 views)
sturovo is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Full_Tilt_Boogie
Build Threads
84
04-12-2021 04:21 PM
ihiryu
MEGAsquirt
33
10-08-2015 04:56 PM
MiataGarage
Engine Performance
5
09-29-2015 11:04 PM
brandonbkd
MEGAsquirt
0
09-28-2015 11:52 PM


Quick Reply: EMB Map help



All times are GMT -4. The time now is 11:18 AM.